Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have a 1997 H1 which is a 10.3 GVW. It needs both frame rails replaced. Im having a hard time finding 10.3k frame rails, but 12k seem plentiful.
My question is what would I need to make 12k rails work on my truck. Or does anyone have leads on 10.3k rails
It all started when my front LH caliper was sticking on my 84 M1028 that I just bought. I figured it needed some lube, so I took it apart and grease it up and put it all back together. Just so were on the same page Ive owned like 6 of these trucks, so this isn't my first time working on one. Any...
http://www.gmsquarebody.com/forum/showthread.php?t=9868 This is my cummins swap build, it has some tid bits about the nv4500 swap hope some of it helps
Just wanted to give a final update on this problem I've been chasing for a few years now. Turns out it was the 37 military oz tires. Two different sets of tires and rims still the same vibration. Put a set of h2 rims with nitto tires truck drives amazing now . Thank you everyone here for all the...
ok so here's an update.
I am older and a lot smarter now. My truck has a 12v Cummins with a nv4500 5speed. I've have about 8k miles on the swap truck runs great. Problem is THE TRUCK STILL SHAKES. I cant figure it out. I put a custom built double CV drive shaft. So with the truck on jack stands...
free image host
I wouldn't say it was hard but overall there was a lot to do, from the nv4500 install to the cilivian wiring harness that I put in it was just a lot of work.