• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by MGKMartin

  1. M

    Door handle parts

    I probably still have some. Does your door handle lift up or pull down?
  2. M

    Purchasing M-1078 or M-1079 thru GovPlanet

    We currently have 3 M1079's. We have a 1998 A0 and a 2006 A1R in stock and a 2002 A1 waiting to be picked up as soon as we can get access to the base after quarantine is over. The A0 is $25k, A1 $30k, and A1R is $35k. All will be fully serviced, mechanically sound, and come with our standard 6...
  3. M

    Can Someone tell me the difference. LMTV FMTV

    We buy a LOT of trucks and we try and avoid the auctions too :-). With as many as we purchase, we pre-inspect all the trucks we buy and get them in batches before they hit the auction site and even then we end up cutting up 20-25% of the trucks when we find problems that aren't cost effective to...
  4. M

    Can Someone tell me the difference. LMTV FMTV

    Unless you get up into the M1089's, the rest have the same frame and most major components. Even the axles are the same across the entire family. The major difference between the M1083's and the M1078's are the HP rating of the engine (290/330 vs 225), bed/frame length, intermediate axle, and...
  5. M

    Purchasing M-1078 or M-1079 thru GovPlanet

    EUC, Bill of Sale, and SF-97 wait times are WAY up. If the truck is Demil A then you will only have the release paperwork. If it is Q be prepared to wait multiple months (sometimes up to 6 months) for the EUC. The good news is that you will have the SF-97 or Bill of Sale by then. We strongly...
  6. M

    Removing Cab

    The TM's have the entire process. For the junk cab, disconnect everything and just lift off. For the good one you are putting on, make sure you use a spreader bar so you don't crush the rain guards or bend the roof.
  7. M

    Any tips on buying a Stewart & Stevenson M1078 is there a link and if so sorry I am looking

    We have a couple of M1083A1's with the 3126 that are factory set at 330hp. You don't have to go to the C7 to get that HP.
  8. M

    Considering LMTV

    The 1078's are great trucks and if they are taken care of, they are pretty reliable. We stock most of the FMTV line and keep quite a few parts in stock including spare engines, transmissions, complete power plants, etc. www.fmtvsales.com
  9. M

    Any tips on buying a Stewart & Stevenson M1078 is there a link and if so sorry I am looking

    Cat's are expensive if you buy new or direct from a dealer, but they are an extremely reliable engine and are pretty cheap to replace if you blow one up. We stock pretty much the entire line of FMTV's (1078's, 1079's, 1083's, 1084's, 1088's, 1089's etc) and keep most parts in stock including...
  10. M

    Anyone registered a FMTV in Nevada lately with SF-97

    Just got back from Nevada DMV and they are claiming they can't register a vehicle with a reassigned SF-97 from Gov Planet. They will only title and register the vehicle if Gov Planet issues a title. Anyone heard of this?
  11. M

    differential seals - leaking and replacement

    I haven't done it yet, but according to my senior mechanic (37 years as a National Guard wheeled vehicle mechanic), it can be done in place. He is off tomorrow, but I can get more info Thursday if nobody else has responded by then.
  12. M

    Legal issues driving on street with turret cupola

    There is a MASSIVE difference between driving around with a mounted dummy gun (or even a live gun) and driving around town firing a propane .50. Unless it is a sanctioned event, seeing some idiot driving around in a military vehicle firing a weapon will send people into a panic. They don't know...
  13. M

    Legal issues driving on street with turret cupola

    I drive a M1083A1 with a full turret setup with armored GPK and have never had an issue in Oregon. Only negative comment from a cop was when I stopped to help pull a truck out of a ditch. The cop on the scene gave me grief because I didn't have a gun mounted at the time and he thought it would...
  14. M

    M1088 Removing the 5th wheel hitch- any suggestions getting the nuts off bolts?

    We just cut them with a torch. You won't reuse them and it is a LOT faster.
  15. M

    Need Help, HWWMV Armor doors

    www.federalmilitaryparts.com has them
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks