Recent content by mreuss222

that is not the correct heater core. this is what i have and bought. https://www.ebay.com/itm/233339574643 also you dont have to open the AC lines. you just take most of the screw out holding the 2 parts together . take off coolant lines by coolant overflow tank. take the unit off the body...

Morning guys. I have a m1152 rev/ecv. the heater core is leaking. I have been searching the web for answers and not coming up with much.. There tons on the old models but not mine. has anyone just replaced the core? has anyone found a utube on it or anything like that? thanks in advance mark

I should have added more detail. I have 195 thermostat. Paradox coolant kit installed. This works great but now that it's winter in Vermont it struggles to stay at 185. I have the radiator 1/2 blocked on top of hood and the front grill 100% blocked. Still struggles. I would like to see 195...

any tips on keeping the eng in operating temps? mine stays 180ish..

Im wondering also..

hello I have a off topic question. I am looking for pics of the top you have on your truck but from the inside. I am wanting to get one and cut it up. To have the hard top part cover just past the c pillar. then make a curtain for the back. so it looks like a hard top with the bed area...

yup found that out. and found out that i will have to enlarge the hub hole a little :( didnt realize that neither did the person i bought them from. was hoping someone here has done this and had some advice.

Well it's been done before. Seems to be a stout rim.

Thank you for your input. I hope someone that has the same rims chimes in with what they did. I did find of old post that talked about grinding it down. But would like a little insight on that. Not sure if a machine shop would work on it with the tires on . All on with balancing beads also...

Hello Guys. I'm new to the hmmwv. I've had 5 tons for a few years and just bought my first m998. When i bought it the seller had stock h2 rims. I was told it was just a bolt on. I had them powder coated tires mounts . and guess what. they don't fit over the hub. close but no cigar.. Has anyone...

I just powered coated a stock set of h1 rims mounted 39s on them Went to mount and they don't fit. I have a 91 m998. I was told they fit. The hub opening on the rim is to small by a 1/8 on each.side. Anyone have some input on this?

I just bought this m998 the other day I Would like wiring diagram of headlights. where it comes to the hood then splits to each headlight. it has led headlights also has anti flicker device inline before headlights. I know they aren't needed and i should have unplugged them then. I didn't...

i have 4 inch to 5 inch under the cab with no muffler. i also have a 2016 ram full delete no muffler. the dodge is not loud at all. the 5 ton is about at my limits for sound.. I cut open my stock muffler and cut the crap out of it and welded it back up. sounded good and egts dropped a bit...

found this for the stock hx40 turbo... https://www.amazon.com/Diamond-Eye-221040-Downpipe/dp/B01DYBW3II/ref=pd_sim_263_4?_encoding=UTF8&psc=1&refRID=QTAJAE1D9HNKTZKPDZYE DIAMOND EYE PERFORMANCE 221040 HX40 TURBO DOWNPIPE, 4IN; ALUM: 94-02 DODGE 5.9L CUMMINS -...