Recent content by P32pac

  1. P

    Mep-803a high idle

    Finally had a chance to work on my generator. And all I can say is thank you to everyone on this site. I’d also like to thank Gary Jones. I got parts and a lot of information from him. I put a video up on my YouTube if anyone is interested in watching it. YouTube site is p32pac1. The generator...
  2. P

    Mep-803a high idle

    While I’m waiting to source the pumps I will take the side cover off and check for debris for sure.
  3. P

    Mep-803a high idle

    Thx I’ll give Gary a call.
  4. P

    Mep-803a high idle

    Yeah I’ll try a magnet and see if I can fish anything out. You know a good source for the injector pumps???
  5. P

    Mep-803a high idle

    Finally had a chance to pull fuel pumps. Found some interesting stuff pics attached. Definitely the pumps are an issue. 3 of the 4 small fuel rail bars are broken off and one looks damaged as well. They were very loose and leaky when I got the unit so I hope someone just swapped out good ones...
  6. P

    Mep-803a high idle

    Ok I’ll leave 4 in and do the other 3 and get a feel for the rack. I’ll let you know how I make out. Hopefully I won’t have a 1200lb boat ancho. Lol
  7. P

    Mep-803a high idle

    I have done that already and I did have no resistance at all except on injector #4 so I’m sure something is stuck.
  8. P

    Mep-803a high idle

    I think it’s the fuel rack as well. I will pull the injectors and and follow procedures for reinstall. I have to go out of town for a few days but as soon as I get back I will do it and let you know how I made out. Thx again.
  9. P

    Mep-803a high idle

    Guyfang. I posted the new 30 sec test on my YouTube (p32pac1). Thx.
  10. P

    Mep-803a high idle

    Ok will do tomorrow morning.
  11. P

    Mep-803a high idle

    Guyfang. I loosened the black knob and followed the tm you posted and still no change. Racing and smoking just like before. Im ready for your next suggestion if you have any.
  12. P

    Mep-803a high idle

    Ok i will check the knob and set the engine stop screw and let you know how it goes.
  13. P

    Mep-803a high idle

    Guyfang. I did the 30 second test you requested. If you don’t mind I posted it on my YouTube channel it’s p32pac1. Thx again for the help. When the generator first started it sounded ok but then started racing again and obviously did not turn off right away. I set the stops back to where they...
  14. P

    Mep-803a high idle

    Thx reset2 I have a couple good things to check for sure. I did get it from gp.
  15. P

    Mep-803a high idle

    Ok I will do that before I do anything else. I didn’t want to move the set screws at all but I had to rule something out. Thx.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks