• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by rsms

  1. R

    Drash/GET Perkins 20KW no fuel problem

    One of my perkins powered gen sets has a similar issue that I have not fully diagnosed. It will get no fuel on occasion and I have to unscrew the solenoid to get it to start them I can screw it back in once its running. I've been thinking I have a lazy solenoid as it doesn't do it all the...
  2. R

    Drash/GET Perkins 20KW no fuel problem

    I would be interested to know what you get and if you ever get any 60a connectors I'm always in the market for them. I can use any of the 4 types (power source, male or female cable, and load) with or with out contactor pins.
  3. R

    Drash/GET Perkins 20KW no fuel problem

    lol....I know the feeling. That's why I bit the bullet and went out and bought the correct crimper to build my own. Not a cheap way but it did make it easier to get exactly what I need.
  4. R

    Drash/GET Perkins 20KW no fuel problem

    How many cables do you have to spare? Are all of your cables only about 16'? I make my own but I'm just about out of the connectors and could possibly use a few more longer cables
  5. R

    guidance needed to parallel 2 drash gen sets together

    I ended up buying a PPDU a while back and I believe I bought a parallel cable from you on fleabay. After making a couple of small changes in my PPDU I got everything up and going. I have 6 of these rigs and I'm working on getting them ready to work as stand alones but I might have an interest...
  6. R

    Drash/GET Perkins 20KW no fuel problem

    I have a few friends in the HVAC business and all of them were a little hesitant about me buying NU22 to recharge my ECU's. I ended up using R22 as we still had a couple of bottles in stock. I'm wanting to think it was something about the oil viscosity but I could be mistaken on that. I will...
  7. R

    Bruce Industries Type 3 100KW Load Bank

    I didn't make it back to my office in time today and I don't think it's a problem to mention this so......If anyone won any of these multiple lots I would probably be interested in taking one of them off your hands. Once again if this isn't in the proper place please delete
  8. R

    Bruce Industries Type 3 100KW Load Bank

    how would the power source get connected to these? as in is it wire by wire individually or does it have provisions for pre-made cables to connect the power source to it? After reading my question even I'm confused lol hope you understand what I'm angling at.
  9. R

    1972 Search & Rescue Pinz

    they are definitely a pretty well thought out machine. very capable for sure
  10. R

    1972 Search & Rescue Pinz

    Guyfang........Any idea what make or model the last bus is? At 1st glance it kinda looked like a 21 window VW but it's definitely not.
  11. R

    1972 Search & Rescue Pinz

    Nice looking rig!!!!
  12. R

    Cummins 7L Supercharged 45KW Get Set

    I have a cummins powered 185KW with a KATO generator on it that the engine looks very similar to. Mine to the best of my knowledge was non-military issue but it did come from a municipality so it's possible it could be either civilian or military. I bought mine a couple of years ago to be a...
  13. R

    GETT 23kw 120000btu - Applied Companies

    NEIOWA.... You enlightened me on something, the 120000 BTU ECU's use 18" return ducts while the smaller BTU ECU's appear to use 16" return like you mentioned. I'm not sure on what BTU the smaller ducts apply to but it appears to be the models that use 1 supply duct and 1 return duct as opposed...
  14. R

    GETT 23kw 120000btu - Applied Companies

    That does sound like a lot of work to solder them together..... Everything about these cables is expensive but the end product is very nice. You are 100% on how they go together. The pin removal tool does make it a lot easier to remove the pins if need be. I've heard of people using a piece...
  15. R

    GETT 23kw 120000btu - Applied Companies

    I'm curious, how did that work out? I was originally considering doing this also but after a lot of reading I found mixed opinions on this. I ended up just buying a crimper (not cheap) and then the correct dies (also not cheap) as I have plans for several cables. The crimper makes it very...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks