• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by TexasFlu419

  1. T

    M37 Brake Hoses

    Thanks for heads up. I'll give them a call.
  2. T

    M37 Brake Hoses

    I'm an idiot. I just looked on the VPW website again, and they show using the same lines for the axle to wheel as the chassis to axle. I just did not read it properly (partly because I was looking for banjo fittings on the ends). Sorry for the false alarm.
  3. T

    M37 Brake Hoses

    Thanks for the reply. They don't have them listed, or I could not find them on the Vintage Power Wagon website. I did send them an email asking if they are available. Thanks again.
  4. T

    M37 Brake Hoses

    I just purchased a 1951 M37 that runs great, though does not stop. Put in a new master cylinder, and found out the three front soft line hoses are clogged up. Looked through the forum and several of the online companies, and cannot find the lines that go from the axle to the front wheels...
  5. T

    HMMWV Fan Clutch Demons - Please Advise

    Great tip. I had a non-working power steering, but working power brakes. Switched the lines to the above, bleed the system and now have perfect power steering. Thanks.
  6. T

    NSN 2590-20-006-8327 GPS Mount

    Thanks for the reply and info. Hopefully someone on SS has seen them mounted.
  7. T

    NSN 2590-20-006-8327 GPS Mount

    I purchased a bunch of these GPS Mounts and I have no idea how they mount, and if they even mount on a HMMWV. Anyone no where they go? Thanks.
  8. T

    M1045A2 4L80E Transmission Wiring Problem

    I finally figured out the wiring. Hopefully no one will have this problem, but I wanted to get the thread complete, just in case they do. The five wires coming from that bundle are: Wire 1 - 290/291/537/537B/537C - This wire connects to the positive battery terminal, providing 12V Wire 2 -...
  9. T

    M1045A2 4L80E Transmission Wiring Problem

    I received a box from Gov Planet today, containing a replacement TCM, and the breaker/relay wiring box with the wiring that comes out of it (pic attached). Since there are five wires in the bundle from the breaker/relay, and the bundle in the trans tunnel only has four, I am assuming one of the...
  10. T

    M1045A2 4L80E Transmission Wiring Problem

    I'll dig deeper next time I am up there (the HMMWV is not at my home). Nothing is connected to the battery yet. Are you saying the power wire that goes to the breaker (290/291/537) is supposed to attach to the positive terminal of the rear battery? It currently is laying across the top of it...
  11. T

    M1045A2 4L80E Transmission Wiring Problem

    I thought I took a picture of that, but I can't find it. There were only four wires in that bundle - those are the four I referred to as being in the transmission tunnel at the beginning of this thread.
  12. T

    M1045A2 4L80E Transmission Wiring Problem

    Yes, those are the connections. Hopefully Gov Planet sends me the whole thing. Thanks.
  13. T

    M1045A2 4L80E Transmission Wiring Problem

    Action, that is a good tip, thanks. Retiredwarhorses - I'll take you up on that when my replacement harness comes in. Thank you very much.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks