Recent content by vmaxmike

looking for a camo or green cover for a HMMWV trailer. Just needing the cover not bows or anything else. Some repair need is fine Thanks in advance M

Plus 1 on Novus M.

This is at least a starting point, much appreciated M.

Bump

I've been unsuccessful in finding any part numbers for a few replacement parts for an EOD body. if anyone can direct me it would be much appreciated. The pic below shows the fabric seal between the box and the 2 man roof. This and the supports for the rear lift door are what I'm currently...

I've tried searching but didn't find an answer to my question. hoping someone can shed some light or has been down this road. I'm interested in buying a military truck that was purchased at auction 25 years ago and he guy never got a title. It appears that he has all the paperwork and the...

It short the lower the UTQG number the softer the rubber ( think sticky good for high speed cornering ) but they don't last. The Higher the number the harder the rubber ( They wear much slower ) but they don't stick. M.

Google UTQG you'll get an explanation Tread wear is mainly about the tires durometer measurement ( hardness of the compound ) This measurement also changes with heat cycles. M.

Thanks that good to know, I'm only using the Pulse box it self not the solar panel I wired a NOCO Gen5X2 battery Maintainer into the system for storage charging. I was wondering about the stock 60amp , the light bar I've got only has 4 HIDs and the two IRs. I'm planning on putting three...

That's a hard lesson learned, glad it wasn't worse. I had a good friend that had a shop fire a short time ago, not a pretty thing.

Interesting, in that scenario you're correct things are going to get sporty real fast.

OK, I'm listening... I put it in the category of "can't hurt"...... Please elaborate on "grounding loops can be dangerous" M.

Agreed on that, I've run a grounding kit on mine and could pick up at that point on the body. Just cleaner looking than a ton of redundant wires.

part number: m22759/34-10-0 This link is black wire https://www.milspecwiring.com/10AWG-Wire-Solid-Colors-BLACK_p_1159.html This is Red https://www.ebay.com/itm/203846386514

Ok found a vender for Mil-spec 10ga wire , I'll make up another harness and pull power off the Pulse box. Thoughts on ground wire, run it all the way back to battery box , or can I get away with a shorter run to one of the grounding points on chassis or engine block? M.