jlt1987
New member
- 16
- 7
- 3
- Location
- Wappingers Falls NY
Anyone know what size fitting goes on the brake booster for the hose that goes to the power steering pump-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Brake booster fitting
- Thread starter jlt1987
- Start date
Anyone know what size fitting goes on the brake booster for the hose that goes to the power steering pump
- 4,487
- 4,367
- 113
- Location
- Brentwood, Calif
I have them in stock
jlt1987
New member
- 16
- 7
- 3
- Location
- Wappingers Falls NY
Hi Thank you for your reply. I would be interested in one. Where do I go to buy one from you.
- 4,487
- 4,367
- 113
- Location
- Brentwood, Calif
Shoot me a PM
jlt1987
New member
- 16
- 7
- 3
- Location
- Wappingers Falls NY
Having trouble with my PM. Sent you a E-mail
- 7,959
- 20,309
- 113
- Location
- Charlotte NC
.
Just so you know - there is a limit on new members and sending a PM. You will get over that in a few days and conversations. If you sent an email to @Retiredwarhorses you should be good...
jlt1987
New member
- 16
- 7
- 3
- Location
- Wappingers Falls NY
still looking for brake booster fitting. A used one be good
- 7,188
- 10,063
- 113
- Location
- Papalote, TX
Be patient, RWH is a busy guy.
If you are still in need I suggest you follow the forum rules and put in a want in the classifieds
jlt1987
New member
- 16
- 7
- 3
- Location
- Wappingers Falls NY
This is the fitting I need.
- 7,188
- 10,063
- 113
- Location
- Papalote, TX
That is a very specific fitting to adapt from the power steering O ring world to the AN (JIC) fitting world, why not just buy it from HPG where you got the picture.
Again that is not a common fitting you are going to find locally.
You may be able to find it at a racing supply house like Summit but I don't know the sizes.
The AN side will likely be an AN-6, that matches the 3/8" hose, the other end is probably a 5/8" or a 11/16" O ring
Then again the O ring side could be metric.
Again that is not a common fitting you are going to find locally.
You may be able to find it at a racing supply house like Summit but I don't know the sizes.
The AN side will likely be an AN-6, that matches the 3/8" hose, the other end is probably a 5/8" or a 11/16" O ring
Then again the O ring side could be metric.
Last edited:
- 7,188
- 10,063
- 113
- Location
- Papalote, TX
If you look up the part number, FF3323-0706-259 or 4730014934656 you can find the specs, I see HPG is out of them.
It appears to be a AN-6 to 11/16-18 O ring
This might be what you are looking for, but don't hold me to it.
www.summitracing.com
It appears to be a AN-6 to 11/16-18 O ring
This might be what you are looking for, but don't hold me to it.
Russell Performance 648040 Russell O-Ring Power Steering Adapter Fittings | Summit Racing
Free Shipping - Russell O-Ring Power Steering Adapter Fittings with qualifying orders of $109. Shop Power Steering Fittings at Summit Racing.
jlt1987
New member
- 16
- 7
- 3
- Location
- Wappingers Falls NY
Thanks. Ordered it. will see if it worksIf you look up the part number, FF3323-0706-259 or 4730014934656 you can find the specs, I see HPG is out of them.
It appears to be a AN-6 to 11/16-18 O ring
This might be what you are looking for, but don't hold me to it.
Russell Performance 648040 Russell O-Ring Power Steering Adapter Fittings | Summit Racing
Free Shipping - Russell O-Ring Power Steering Adapter Fittings with qualifying orders of $109. Shop Power Steering Fittings at Summit Racing.