Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Welcome from NE FL. Nice looking Bronco. I'd look for a either a MEP-003A, or MEP-803. Both 10kw, 803 has sound suppression. MEP-002A/ MEP-802 5KW units might fit the bill depending on A/C size. Mil gensets are a little underrated on power output, where as civi units are probably a little...
My "new ones" are dated 1989. But at least now I have samples to try and get some PTFE stainless hoses made too. Have'nt found anywhere close by here that does that.
Ok, thanks whatadeuce. Had me worried for minute.
I took the switch out, and hooked up the connecter, then massaged it into place. That would have been a real bear with the switch in place.
It's definitely been an adventure.
I sure didn't do it for the fun of it though, not fun at all. LOL.
What about the light switch connector?
Are you talking about the big one for the 3 lever switch? What do you mean by address it? Is there a problem with it? I've already hooked it up.
It's...
Started installing the new front Harness, rebuilt the Harness clamps that go on the inside of the frame rails with some rubberized heat shrink. These clamps have a 1/2" hole and attach to the U-shaped tie-down fittings. I also relocated my turn signal flasher to the firewall cause I didn't like...
Modified some PVC valve grommets to replace my rusted away fwd frame grommets, the ones in the frame, under the Radiator that the wires for the front turn sinals/parking lights run through.
Cut the shoulders down a little. Put a one inch rubber drum sanding arbor in them, chucked it in the...