restlessrobie
New member
- 63
- 0
- 0
- Location
- Puget Sound
SO I have inherited a mess of an M211 and have a few of the problems fixed but the one that is giving me the most trouble is the Power steering Mod the previous owner has performed. To make a long story short it appears that the original stearing box was removed and the shaft cut off and welded in place to the cab. The end of the shaft has a universal joint welded to it and then makes a steep 35-45 angle out of the cab through a hole cut in the fire wall. That attached to the gear box seen in the picture and attaches to a rather large modified pitman arm. Which is also attached to a ram which is a little short as installed and does not allow for complete Right Hand turning. The gear box appears to be a power unit but the welded together drag links look a little scary as well. So if anyone recognizes this kit I would love to find some actual install instructions before I yank the whole mess out and start over.
Thanks in advance as always
![20160820_164732.jpg 20160820_164732.jpg](https://www.steelsoldiers.com/data/attachments/436/436611-d54ef8b17a2d70eb2fe08ef5ea476ab0.jpg)
![20160820_164726.jpg 20160820_164726.jpg](https://www.steelsoldiers.com/data/attachments/436/436612-871b1385daea916a018340ef15cc1ca3.jpg)
![20160820_164750.jpg 20160820_164750.jpg](https://www.steelsoldiers.com/data/attachments/436/436617-48d1667f8aebfbf72f2afef1d5948251.jpg)
Thanks in advance as always
![20160820_164732.jpg 20160820_164732.jpg](https://www.steelsoldiers.com/data/attachments/436/436611-d54ef8b17a2d70eb2fe08ef5ea476ab0.jpg)
![20160820_164726.jpg 20160820_164726.jpg](https://www.steelsoldiers.com/data/attachments/436/436612-871b1385daea916a018340ef15cc1ca3.jpg)
![20160820_164750.jpg 20160820_164750.jpg](https://www.steelsoldiers.com/data/attachments/436/436617-48d1667f8aebfbf72f2afef1d5948251.jpg)