Search results

What day will trail recon be done on?

I have been buying these rotos from autozone for $165.00 ea.

You can get rockwell rotors for the B700 and F700 from Autozone. Duralast rotors with PN# 5483, 15.375" OD.

Cut the large hole in frame, cut and brake up the flange. Drill a lot holes and plug weld one hole to the frame. My tank is from a 2000 up F650/ F750 power steering reservoir, i cut and welded in a section to double the capacity. The next couple of days I have a lot parts to make, machine from...

The upper front mount bolt on the steering box lines right up on the rivet hole that was left behind from the reinforcement plate. It has that circle on it. This looks like the place to put it. This is the same as M35A2 and A3.

These brakes have a massive amount of machine work to the rotors and hubs on the front. As for the rear just open up the bolt pattern hole, no machine work. Please do not use disc brakes with wilwood calipers and rotors, for these are for 2,500 race cars.

Not sure what the big deal is, one front and two rear axles. But this was 12 years ago.

I made all of my 2 1/2 ton disc brake kits for 16 years. Those pic's were the very last set I did. There will be no more.

Well today we got her setup and tore down, no turning back now on this M35A3. I will make it to the 2016 SS GA. meet with power steering or bust.

My truck weights 12,300 lbs. Come ride with me and i can trough you thru the windshield. This was 2013 and i no longer work with rockwell axles.

Hello from Florida, are you able to make it down to the 2016 SS in GA. next month?

I have got to survive the 2016 SS offroad trails first.

yea

I removed the pinion cover to look at it, the R&P is totally different in the gear over box than the front axle and third axle chunk. The end of the pinion has the oil pump mounted on it.

I call them gear over box. 3.07 gear with 2 to1 hubs makes 6.14 final ratio.

You asking about the RF-19 Meritors axles that are used in the M1078A1 and up? Brand new with 3.07 / 6.14.

FMTV new takeoff brakes RF-19 Meritor I have new take off air brakes for the front and rear ( rear backing plates not in this pic) of the LMTV and FMTV, RF-19 Meritor axles. Complete backing plates or drums, $25.00 each piece. Will bring to the SS GA 2016 event. If there is no interest in these...

What about caps? There was no hats last year.

This one is a Detroit True Track, this not really a locker, it is better than a locker. The new Detroit lockers for the LMTV will be available in a week or two.

Ready to go.