Search results

Installed a new bridge plate today. The old one was pretty ratty looking. What a pain in the butt to replace it with the grill attached to the truck:mad: The old one

I've been having problems with a ground issue with the right brake light/turn signal. It seems like the tail light bracket is not grounding so I ran a jumper wire from the bolt on the back of the tail light to the mud guard and my lights work properly now. All though it doesn't look very good...

Me haulin' the vets in the Rawlins Wyoming fair parade:driver:

:D The mud pit is directly behind my truck out of view. A spectator took the picture and sent it to me.

My M35a3 was the recovery vehicle for the Hanna Wyoming annual King Coal Days mud drags

Replaced the filters in my air dryer on my M35a3

Changed the oil and filter, fuel filter and greased the chassis. Also added a new attention getter8-)

Removed the rusty crusty heat shield off of my A3 today. Looks much better without it.

Filling up a flat tire on my pick up[thumbzup]

I work for Union Pacific as a locomotive engineer. I had a GE AC4400 engine runaway on me on a 23,000 ton soda ash train once. The fuel cutoff switch wouldn't kill it:shock: Looked like this https://youtu.be/6_M13Xlw0o4

Repainted my wiper arms and replaced the wiper blades. Hopefully fixed a pesky ground problem on the right brake light/turn signal. I also paid it off!

When you have the VFW flags mounted behind the cab don't drive under low tree branches.aua

Hauled a couple loads to the landfill for a friend today. He wanted to use my pick up but it probably would've taken 6 trips:shock:. Only took 2 with the deuce[thumbzup]. Here's a pic of trip #2. The first trip was quite a bit larger, I wish I would've gotten a pic.

I got the tires rotated the other day and left them facing the same direction8-)

I'm in trouble then :neutral:

If they're facing the right way. I was going to move the front wheels to one of the rear axles and move the rear to the front.

Pretty soon I want to rotate the tires on my M35a3 and I was wondering if they're facing the right way?

The deuce and I were in the annual Hanna Wyoming King coal days parade i was made the official recovery vehicle for the mud drags:driver:

Changed the oil and PMCS everything.:driver:

Yes