Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I purchased a front winch bumper like the one in the pic below. Pic #1
Problem, I didn't realize that apparently I need 4 other related brackets (that aren't cheap) to mount it correctly. Also, the fairlead slot seems narrow (maybe Warn had a narrow drum and the capacity sucked?) So now I'm...
I decided to mount the cut off switch near the doghouse on the passenger side because there was an access point from a previously removed piece of coms gear. At least this is where I'll put it for now.
Upon further inspection I decided to install the switch near the doghouse on the passenger side because there was already an access hole there from a previously removed (I think demil) piece of radio gear. I know it's out in the open but I figure far enough away a crook would hafta spend some...
I've found a lot of good advice on what brand of battery cutoff switch (I bought a Pollak) to use, but I can't find any examples or photos of how / where guys actually installed the switch on HMMWV (not a 5-ton). Anyone out there have some pictures or advice of how they actually routed the wire...