Search results

no, they are bolted into the humvee. It looks tight because the other end of the humvee padding is up (missing the little screw) once I bolt the pad back down it looks normal. Optical illusion.

are your referring to the center ammo can? If so its just a extra glove compartment just storing small stuff and the ammo can also converts to rear cup holders.

Also installed my custom interior lights. The lights are adjustable and will ultimately be ran with a door switch, so open the door on the humvee the lights come on. Allso made good use of the circles in the bumper.

Yeah that’s what I’m going to do. It’s just the idea that new decals having really good adesive need to have more. thanks

You know what, I hade to the same thing. My hose was also dripping but this was the second time I had to tighten it, so time for a new clamp.

Hi. The camera and lcd screen was bought on epay and the mechanical switch was repurposed from an old lawn tractor. It was the kill switch that was mounted under the seat. I just bolted in the shifter so when the humvee is put into reverse it activates the lcd and camera and obviously shuts off...

Installed my version of a back up camera with reverse on function.

Yeah Action it’s mostly aluminum. I was just puzzled because I did buy other decals (like wait to start decal, etc) that was missing and they stuck. So I was wondering if they had to be OEM or something.

I couldn’t find the answer to my question as to why decals won’t stick to the humvee. I bought these M16 Rifle decals (see picture) on eBay and they seemed to be of good quality and pretty sticky?

Got all the guns mounts finished and went to add the final touch ( the m16 rifle decals) and they won’t stick? i mean they look good but if you touch them they will fall off. I have know idea why?

My Ant-theft key ignition system. This is basically a keyed kill switch which kills all current to the stock ignition system. just insert the key and tun to activate the Humvee. With out the key the humvee is dead at the OEM ignition section. Also replaced my shift indicator light.

Hello Action. To me the lower mount isn’t an issue with the high beam switch but then again, it all depends where you rest your foot.

No sir. I super glued them. Ha,ha, no I Drilled the holes and bolted them but only the bottom mounts, the tops and lower rears are self tapping. A bit over kill for the the front bottom mounts but oh well. Yeah I get your point on the lack of room (big time) in the rear, but no body rides in the...

Added some M16A1 Gun Mounts and updated my dash Lights.

Got them all done, accept for the back. It was a pice of cake! Also updated my Dash cluster lights. .

yes, easy to make make if you have the material, nevertheless, I will just buy a small piece of stock tubing and make them. The measurement are perfect thanks a million for that.

Crap! so what i need is just the 2 blocks then i'm good? Do you have them? I think you mentioned it?

hello juanprado. i'm a bit confused. I don't have rear upper mounts like the ones in your photos. heres' what i got (See Pic's below) Was i sold the wrong Rear upper mounts? Because all 4 of mY upper mounts are the same and the 2 lower (butt stock mounts) are different which i know for sure is...

Yes airsoft has come a long way in realism. I play professional paintball (Much like airsoft but it hurt's more and usually has less cheating) Moreover, yes I will make sure no loser (thieves are losers) will walk off with my fake M16A1's, i will secure them. I bet that squad car will be...