Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I am anticipating that the crane post will be larger than 2" receiver just for strength. But I like the idea of doing the 2" for other things, like antennas, vice, flags, etc. Good idea!
Tailgate/Bed Crane Mounts
:idea:
Anyone mounted a bed crane with a flush mount? I am looking at putting in some type of post mount that can be slipped out of the bed so it doesn't obstruct the corner of the bed when I need to put a wide load into the bed.
This is going to require some...
Does anyone know if there is an electrical schematic of the A3? Didn't seem to find one when I looked through the manuals. I am specifically trying to locate the power source for the CTIS system. Pin 9 of the controller plug is supposed to have +24 vdc but no joy.
Mark
Gary, Pete & Moto
Well all things considered I think I will not repair or use the system.
Winter time is my primary use of the vehicle and its below +20F virtually everytime I use the vehicle.
I think I will just build the redneck manifold assembly and keep it in the truck.
One other item,,,,I...
Wow,
Thats way above and beyond the call of duty! I can only hope to provide that level of service in my business!
I would imagine one of the benefits of dealing with OD iron is that it is, above all things, durable.
In the communications business, 15 year devices are almost impossible to...
I probably will spend a lot more time in snow than sand. Does the lower pressure produce a noticeable increase in traction in snow? I have seen the redneck manifold thing done recently and it didnt seem to be to much of a problem if you aren't going to transition from soft ground to pavement...
New A3 Owner, CTIS Question
Hello All,
New owner of A3 #5013380. Only issue with truck seems to be a completely dead CTIS. After reading every post on the site concerning CTIS, I have the following questions:
1. I live in Casper, WY and I just wonder if having the CTIS fully operational will...
A3 wheels
I'm a newbie to the Deuce and have been trying to decipher the tire/wheel combo thing. You mentioned the A3 wheels ( which seem to be available). Did you discover any downside to using the A3's?