Search results

Test

Rear white light/ accessory reverse lights I searched the forum for this and mostly found posts about deuce and 5 tons adding back up lights. Kind of surprised me that there wasn’t much stuff about adding additional back up lights. I have been wanting to do this for a while but I don’t have a...

Thanks Ok so I was about to question further as I have a rudimentary understanding of these things including the terminal numbers, but I pulled up a google image and I see exactly what you are talking about. Makes perfect sense. Thanks for assist

bad schematic i don't know if this helps, but it is kind of what I am thinking. I haven't really worked with diodes too much so I don't know size or rating, but its just to run a relay so not too much I would imagine

I installed some accessory back up lights to my M1009. They are 18 watt LED each side. If my math is correct then 1.5 amps each. I am thinking this is a bit too much to just tap into the stock back up light. I also want to add a dash switch to turn these on, but without turning on the stock back...

Spin on fuel filter I read probably 15 threads on this subject and pretty much copied one design, I forget whose it was. I did however learn from all that reading that there is such a thing as fuel grade Teflon tape and how to wind it in the direction of tightening (am I saying that right) My...

Tiny Tach I did a tiny tach install and the doghead relay modification at the same time. The doghead relay was simple and had nice pics in the CUCV sticky notes. The tiny tach was also very easy, 2 wires to the engine thru the speedometer cable grommet, and another power and ground to the fuse...

Hello all, in June 2015 I bought a 1986 M1009 with 65k miles. As far as I can tell it is in close to perfect original condition. There are no screw holes, repairs, welds, and very minimal rust. The guy before me just had a lot of work done including 5 new tires, a new steering gear box...

avcasdvsadvsadvsadvsa frgrgnrfgnrfgnfrgnfrgn fdghdgfhh:jumpin:

I have recently done a lot of upgrades to my m1009 and would like to post my progress, pics, things I learned, and mistakes I have made. My question is this. Should I do one thread for each subject i.e. Tiny tach, spin on fuel filter, light bar, center console etc or do one thread that covers...

The serial number is NWOM6V xxxx

Does any one know how to identify the year and manufacturer of this trailer? It's not on the data plate. I just brought it home yesterday and I was told to guess the year for the sf97.

Just bought an 86 1009 here in Phoenix AZ. Been in the triple digits lately and am curious if I need to summer-ize. I have not yet added a water or transmission temp gauge. Any suggestions? Should I go with thicker oil to compensate for the higher temps? I appreciate any suggestions.

What's the occasion to visit the blast furnace (Phoenix)?

Here you go... Soooo pretty

Just bought my first m1009, 1986, 68k, no leaks, uber clean, no rust, super excited