Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
M939 hard top, steel vs. fiberglass. I'm looking to put a hard top on my M923a2. I'm trying to find a steel hard top but there's not much out there. New tops are $3000 + which is more than I want to spend. Does anyone have any experience with fiberglass tops, fit, cracking etc.
Just painted the wheel and put new o ring and stem grommet in. Still hear a air flow sound rushing into the hub. I will disconnect the ctis line in the morning. Can a bad ctis wheel valve back flow into the hub?
I'm having an issue with the tires leaking down M923a2. When manually filling the tires I hear the sound of air rushing in the hubs. The air rushing sound lasts for about 10-20 minutes. Last summer I would also hear this noise after shutting the truck down. Is this a normal sound, are the wheel...
Mine was leaking from the same area. It was in the upper eighties, drove it for a half hour and it left a small puddle under the axle. I didn't get to look at it for a couple of weeks, when I loosened the breather the air was still under pressure. I have since put a tube breather on it, no...
The truck has been sitting for two weeks.I checked the axle breather before replacing the pinion oil seal. Upon loosening the breather quite a bit of compressed air was released. I'm hoping the the stuck breather was possibly causing the oil leak.
I was hoping someone would have the part number M923A2 rear axle oil seal for input/output shaft. We've have Motion Industries locally, but I need the #. I'd like to get the part before tearing into.
Greg
How is the boom for the spare tire used? I have done searches but could not find info on this. Do you attach a winch/chain hoist to it to raise and lower the tire?
Thanks, Greg
Did the military ever use fiberglass hard tops on the deuces or the 5 tons? I met a guy that an 813 with a glass top and claimed the military used them. Where these rebuilt with these?
Hi,
I am having a problem with the right front turn directional not working. The other three corners are working fine. I tried swapping bulbs, checked connections etc. The marker light works fine on the light assembly so grounding there should not be an issue. I checked the voltage and found...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!