Search results

Does anybody know what the voltage would be on the output of the glow plug relay when glow plugs are cycling when all is good? Been having problems with the m1009 starting cold removed the wellmans didnt know they were not a good glow for these vehicles. Four of them were bad replaced all with...

Thanks for the help it was that stubid little rubber block on the VRV it didnt look bad at first glance but under closer inspection it had a crack in it

I will see if I can adjust it up to 18" at idle, and see what it does. I will make the block to adjust it when I get my mityvac in should be here next week. The lines are ok since I replaced them all, I believe the issue lies with the vrv at this time since the output vacuum is only at 8"...

I tried to find some info on this in the tm but cant find it. What is the output vacuum on the VRV at idle? I have hard and late shifts and the input vacuum is constant 28" and the output vacuum at idle is 8". I dont wont to adjust unless I am sure what I am doing I have a mityvac on order.

ok found a adapter gotta love ace hardware they had it in stock and it ran 4.29. Got it installed with the oil pressure gauge **** fitting started leaking oil along with the shut off valve by the external water bottle cant get either to guit. The temp gauge went up to around 145 and then it...

Looks like I need to get a different adapter or buy a different set of gauges that has the correct adapter. Guess thats what I get for buying harbor freight should have purchased the sunpro, the sunpro has three different adapters the harbor freight had one. Anybody know what size thread that...

Tried to install my mechanical gauge today and it was a no go the probe is too long and I cant tighten the nut and the adapter wont fit the block so I am not sure if a different adapter will work or I need a different gauge. Any other options?

are you going wvo with a small tank also in the old batt tray? Moved my batts to the rear tray but ran out of time trying to figure out how and what to secure them with. Shoot some pix if and when you have a chance. Pretty impressed with this m1009 its been sitting for two months and started...

We shall call you sparky. remember you should have some space between batteries to keep them cool, looks like in your picture you have a space in between them.

I am planning moving both group 65 batteries to the rear battery tray myself. Would like to install small metal svo/wvo tank in the front battery tray area with electric fuel pump and a heated filter.

ok got me a rear seat from 2deuce today thank you!! only thing missing is the lower section of the prop rod that holds the seat in the upright position anybody have one of those?

Your kidding I just started looking this week at fort lewis auctions. Hopefully someone has one they would like to part with.

I am really looking for a one to match the front seats or at least one with vinyl not cloth. All the civy ones I have found are cloth, the best price for the civy is $20 but a good drive to marysville, wa. Might have to do that and just cover it with maybe camo seat cover.

I am looking for a rear seat for my m1009 anybody have one for sale in the Olympia Wa area?

either wellman 070 or ac delco 60gs