Search results

Hi Guys Today when i started my truck I got a big leak from the pressure valve when I reached 70 PSI the leak stopped. Is this normal or do I need to replace the valve because I don't remember that i've got this leak before. Its Williams WM778. Is this a normal situation or is there something...

it's ok , I figured out , it must be installed from outside

Your seal would be item #13 , 113514 which has the NSN 5330-01-157-0897. Or #2AG761, directly from Oshkosh Corp. If I need replace this oil seal ( 3 axle out yoke) , do I need to remove axle cover and do it from inside , or I can do this from yoke side ? thank you

Thank you Guys, all of you I will replace all u joints to prevent this situation in the future. What I understand there is two type u joints 280x ( transmission to transfer case ,and transfer case to axle 2 and 3 ) and 279x (axle 1 to 2 , and 3 to 4 ? )

Guys I have small problem to find correct parts, axle nr 3, rear yoke. According to the PM fig.182 item 3 there is two difrent yokes ? and only item 8 and 9 ( nut and washer), but TM 10-14 showing oil seal, but not part number. any idea ? thank you

Simp5782 ,where I can find a manual with this pictures that you post on #11 ? it will prevent me to ask this stupid Questions Is yoke coming out from axle 3 to the shaft to axle 4 ,is the same part nr that you give me for yoke on axle 4 ? I been used torch to cut ujoint on this yoke, looks ok...

Thank you Sir , you helped me a lot

I broke last ujoint on rear last axle [4], I need shaft between two rear axles [3-4], and rear axle [4] yoke , Im thinking that is English name for this part, I'm from Poland thank you

how to post pictures from cellphone ? can I drive around 10 mils to my place with central locked ?

thank you one problem explained, I been trying to find parts , shaft and axle yoke but no luck , what I funded it's whole rear axle , any idea for parts nr ? shaft probably I can order to build in shafts shops , but axle output ?

Thank you for response My is M983, I was thinking that that power is always on 2 rear axles, even if I disconnected last one [4] I still can drive using just 3 one without turning on 8x8

Hi Guys ,today on the freeway I broke shaft ujoint on rear axle. I spent couple hours trying to remove good one on the side of the road , I needed to use a torch to cut ,and remove whole shaft. I was thinking that I can drive just on 3 axle , but no , I needed to attach 8x8 , WHY ? Dose anybody...

Thank you Guys I will start with u joints

Hi Guys My hemtt started vibrating but just when I start driving, like first 10 seconds, after that no vibration. Any suggestions where to start looking thank you

thank you

hello Guys what kind of oil is in the axle and transfer case I need to refill thank you

the same problem with my Hemtt, i need to replace solenoid every couple months solenoid is always under power, even if the truck engine is off after each ride i need to disconnect the battery, because they are dead next day

Thank you I will check tomorrow at my Local store

Than you You are the Boss

Which number ? Pm says Paoff 4b100 3232059 Try to use www.parttarget ,but always part number is incorrect Thank you