Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I got my TM from Portrayal Press But it's been afew years ago and I can't remember how much it was.One thing that's not in it that I can find is the diameter and length of the wire rope for the boom. Mine has 1/2' but it's too big for the grooves in the winch drum.I think it should be 7/16" but...
If you do have one pop off and try to push it back on with a high lift jack just to get home BE CAREFUL! it can slide off and give you a black eye. Ask me how I know!
I have had to replace one of the lines on my truck and nobody in this area could match the fitting . I had to remove the hard line and change the fitting on it.Two of the other lines had allready been done the same way in the past before I got it.A friend of mine works for the rail road and he...
To put in a 383, 400 or 440 you will have to change the trans. case because of the bolt pattern. Depending on year some engines were internally and some were externally balenced and you will need the corrosponding torque converter. The motor mounts are different but all of the frames I have...
A 360 is almost a bolt in swap, the torque converter needs to be externally balenced or B&M has a weighted flex plate.The right side engine mount where it bolts to the engine is different but you may be able to redrill the hole(s).
Monteagle Tn on 24 looks pretty close. I went to a power wagon rally there 3 years ago and there would be places to load/unload right off of the interstate. I usually work during the day Monday through Friday But sometimes I can get off during the week.PM we with a phone number if you like and...
The tires got here this afternoon.I weighed a couple to get an idea about the weight they seem to be about 90 to 95 pounds apiece.The pallets I have aren't wide enough, I'll have to get some and weigh them to get a shipping weight.
The weekend of the 15th we will be in Paducah KY at the tractor show. If someone going down is going to be close to me I will meet them on the way through. We plan on leaving about 5 friday after noon for KY.
I went by and was able to look at the tires more closely this afternoon.They are allmost all the same brand,Fidelity and a few Armstrong.Some have some paint over spray and some were used on the front with a little uneven wear but no signs of dry rot.I should have them here by this...
I would be willing to meet people half way and I go to MV shows, antique tractor shows,power wagon rallies, and various wild goose chases in all directions from here.Saturday when I saw them we were in the wife's car and I had on "good"clothes and she woultn't let me dig in the pile. I plan to...