Search results

Driveline Clearence Now it seems that after my install of the 4bt, and a 2 inch lift for clearance for the engine valve cap, leaves the oil pan in the way for front drive line. After review of how others have swapped 4bts. It looks like they might have raised the engine to get the drive line...

Thanks went with the GPS speedo :-D:-D

I'mnot familiar with that? After review, i figured it out thanks. Its more expensive but much easier. Thanks for the input. :beer: Crauly

Very nice, looks great

Welcome, from Northern California

My next problem is the speedometer and dash gauges. I didn't want to change them out but the speedometer is only to 60 and Due to the lose/not needed old wiring/harnesses. I having trouble with some connection issues. Does anyone happen to know the pulse rate for the existing cable for the...

Finally finished the doghouse. Used some Spectrum sludge from Second skin audio on the back along with some thermal barrier to help with the heat transfer.

I don't know, I didn't even try. Regular Powder coating is quite durable. So i went with a company nearby. They had to do a two stage coating to get it to the flat black that I wanted. The regular flat black as they refer to it had a slight shine to it. We will see how it turns out.

Upgrades Doghouse I had to make a new dog house due to the new engine and the old style doghouse didn't fit anymore. Dropped it off to be powder coated. Hope it turns out good. :grin:

Updates So I decided to run 24v and 12v due to various reasons. So it took me a while to find a solid way to run it after reading all the pros and cons. I decided to go with a DC/DC charger for the 12v bat and use the alt to charge the 24v batt and power the DC/DC charger. This is powered by...

Whats Next Now I have to set up the electrical. For this my buddy will be assisting/teaching. Learning this stuff is the what I love. What Ive decided to do is to utilize both a 24v system and a 12v system. This is due to several factors. But after I reviewed all the things that were going...

Neary 3 years later..... Well the the once M998 has made some changes. Not being a mechanic as I would like to be I outsourced the work. Not to many people do work on HMMWV nor the type of work that I wanted done. Thus I believe why its taken this long. Big thanks to Carmichael Customs...

Nice truck, Ill keep an eye out

Tedg, Nice truck great job, looks awesome. You know where you got the ibis tek lights that are shown on the Hmmwv? I'm looking for some...any help would be great. thanks, Crauly

Did you find your bumper? I might have some leads...

I will let you know about the LINEX. There has been a delay with Mechanic. The truck and engine/tran should get started in two weeks. So im hoping that I will see it in a few months. Then off to do the electrical etc.... :)

CARC Paint might give you trouble unless you do it yourself or have a shop that will let you do it under the radar. I have been told, at least in Cal, that due to the CARC paints chemicals its not allowed to be sprayed. The Gov makes their own rules. I could be wrong on this but I have...

A2 Bumper As for the new posts, i hope my engine is en-route....I just got an email that might be bad news. But we will see. However I did install the new A2 bumper it looks good. Gives it a whole new look.

Depending on the location and how much prep work is done...For me I did 98% of the prep work so all they had to do was tape it off (~2 hours) and then spray it 20 minutes. For me it was 1000. There are others out there that like Rhino lining but I felt that the rhino lining was to rough and...

Nice truck congratulations.