• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    MEP-804B Problem Starting

    Exactly, with no given context it's very confusing and difficult to accurately respond to.
  2. R

    MEP-804B Problem Starting

    Do you mean the 25amp battery charging system circuit breaker?
  3. R

    MEP-804B Problem Starting

    This is exactly what I have done and it cranks and fires right up like there's never was a problem. Until the breaker (FU1) and Shunt (MT4) arrive, I am running the genset in this configuration
  4. R

    MEP-804B Problem Starting

    I took S10(1) and S10(2) off and touched them together and nothing as I suspect S10(2) does not have a good connection somewhere
  5. R

    MEP-804B Problem Starting

    I ran the generator yesterday and I checked the continuity between post on the MT4(1) & MT4(4) and they show continuity when running and a running voltage of 27V. I don't know if this fuse between the two post is good/bad but
  6. R

    MEP-804B Problem Starting

    No I store it inside my shop at the door so that the exhaust goes out the bay door and it stay's safe and dry no matter what the weather is like. I could load it into the back of my truck and bring it home as it will fit with the tailgate up in a 6.5' truck bed but I think I can get this now...
  7. R

    MEP-804B Problem Starting

    Thanks!
  8. R

    MEP-804B Problem Starting

    I measured across the lugs on the MT4 and there is in fact 25V on each when measured. I never could see if the link between them is good so today I just ordered a new MT4 as it's less expensive to change out the possibilities all at once than it is to drive back and forth and waste gas as it's...
  9. R

    MEP-804B Problem Starting

    Thank you for the tip, I’ll read the manual in reference to these J5/P5 and J6/P6 connectors
  10. R

    MEP-804B Problem Starting

    I see you seem to like OJT, but if you knew the answer and withhold it then what’s the point of these forums? It’s not a treasure hunt, it’s a problem that I need an answer to. Simple, uncomplicated and easy for someone to pass along to others in need.
  11. R

    MEP-804B Problem Starting

    I found the MT4 but it was not as simple as the diagram made it seem as the S10 and the MT4 are not even close to one another. In fact it is hidden away behind a panel making it very hard to find when looking for. Yes it was labeled, however I am barely able to get my head in there and how I...
  12. R

    MEP-804B Problem Starting

    a little problem is a diagram is not a 3D representation of the items plus the harness has a million little wires and the items are not labeled as per a number like CB1
  13. R

    MEP-804B Problem Starting

    When I push the little center post the engine cranks over fine but no start
  14. R

    MEP-804B Problem Starting

    Is this CB1?
  15. R

    MEP-804B Problem Starting

    I check continuity between #1 on the dead crank switch and the small wire on the starter solenoid and they are connected
  16. R

    MEP-804B Problem Starting

    this fuse has 25v on both sides of it and continuity so it’s good
  17. R

    MEP-804B Problem Starting

    Where where would CB1 be located? it ran perfect then it just went dead like a circuit breaker tripped and that would make the most sense
  18. R

    MEP-804B Problem Starting

    does anyone know what the MT4 looks like?
  19. R

    MEP-804B Problem Starting

    i agree and it doesn’t crank hmmmm but the panel doesn’t show life either and the starter solenoid would not control that
  20. R

    MEP-804B Problem Starting

    and the engine does not start when I jump the starter wires as it spins with no problem but won’t light off
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks