Search results

HI, The truck is a 1990 M925A2, new to me. The fuel gauge reads full, and from reading on the forum on searches it sounds like a ground issue. Anyways, I have 24VDC on the back of the gauge when I unplug it, so I assume that is right. Then at the sender I have 6VDC from the plug on the...

Thanks! Put in a new winch cable as well. Engine shows new in 2008 from the tag on it but the hour meter shows over 900 hrs and only 5000 miles, something dont add up there. I figured they would replace the hour meter when the engine was replaced but maybe not>>??>> Tranny looks rebuilt in 08 .

Thanks guys, got to test out my fix when it warms up or the wind lets down. Did oil change with engine oil filter, tranny filter, fuel / water separator, hydraulic filter. Who knows when it was done last! Topped off power steering fluid, coolant, and tightened a hose clamp that was weeping a...

Great, thanks a bunch! That's what I was looking for. Price seems OK to. If the one I have does not hold up I will be purchasing one of those.

HI, There is a nut that that cable goes through , then the cable and nut goes into where the chain hooks up and screws int and binds it into the wedge inside the female part as you screw it in. I just unstranded the cable some so the wedge could fit around the cable and put the wedge in the...

I was there today and I think they had that oil but it was synthetic blend and about $16 or so a gallon...Did not really want synthetic I guess.

HI, Trying to replace the winch cable on my M925A2. Taking off the old crimp on end it busted the inner wedge. (took a bunch of heat and a large impact wrench to get it off). What is the crimp on end between the chain and the cable called so I can research it to buy used?? Or is there...

Thanks, is 10w-40 synthetic?

OK, thanks. Can I use Diesel grade 10w-30 oil for temps below 32 F but up to around 75 F ?. Seems the 15w-40 is only rated down to 32F.

Hello! I have purchased a M925A2 truck. I saw the sticky above with the filters that are needed and for sale at NAPA but it says they are for the M939A2; are the filters the same between the two trucks?? If anyone has the list of all the filters for the M925A2 at NAPA that would be great...

Thanks Guys!

Thanks, just though there was a company used to dealing with working with GL being it is not as easy as picking up at a regular business address.

HI again all! Tried searching this but couldn't find much. Does anyone know of a shipping company that has dealt with GL pick ups? Looking at WI going to MN. Have tried calling and quoting FastTrack Logistics without any luck. Any info here would be great!