• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. B

    help with starting

    she is alive :) the starter must have been alittle stuck cause it took a few good raps with a big hammer and she fired up.
  2. B

    help with starting

    the starter will only engage when the batteries are almost dead. but by then it barley has enough power to turn the engine over. i have tried hitting the starter that didnt help much. what else could it be?
  3. B

    help with starting

    the starter will only engage when the batteries are almost dead. but by then it barley has enough power to turn the engine over. i have tried hitting the starter that didnt help much. what else could it be?
  4. B

    help with starting

    the starter will only engage when the batteries are almost dead. but by then it barley has enough power to turn the engine over. i have tried hitting the starter that didnt help much. what else could it be?
  5. B

    help with starting

    ok the starter will kick in and turn the engine but only after the batteries are out of juice so it is like the starter is spinning to quick to engage.
  6. B

    help with starting

    ok i got the hood open. and i put the charger on the batteries and charged both of them but when i try to start it i just get that clicking noise when u u have low batteries but both batteries were replaced this summer along with the that starter. so do any of you know what it might be?
  7. B

    help

    the handle in the cab moves. but after that i cant get the hood to unlatch i have tryed hitting the top of the hood. but i cant get it open.
  8. B

    help

    on my m1009 i can not get the hood latch to release so i cant get it open is there anyway to release the latch another way so i can open the hood??
  9. B

    rear end help

    ok i have gotten to the "c" clip. but i am having problems getting it off. is there any tips for taking them out??
  10. B

    rear end help

    the c clip is held on by 2 bolts?? if it is i already took it off but the spindle/shaft still wont come out.ami still doing something wrong??
  11. B

    rear end help

    a seal went out on my m1009. the piece that the seal when out on is the piece that the tire bolts on to that goes to the middle of the axle. and i am not sure how to take the piece out of the axle so if you could help me it would really help me.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks