• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. B

    MEP-803A: wiring issue... please HELP

    Did you look at the wire diagram yet?
  2. B

    MEP-803A trips breaker when load applied....Problem solved!

    Put hardware cloth on the lower intake grates too. There easy enough to get on with zip ties. The radiator opening is alreaty rodent proof.
  3. B

    Low Oil and stupidity

    Mine spits oil out if i run it with the cap off too. I wouldnt dig into it to much.
  4. B

    MEP-802a first connection to the house, report

    Did the 802 start your 3ton? Wouldnt do mine with no hard start kit
  5. B

    What’s the going rate for a MEP-802?

    The market is what ever the buyer will pay. Why dont you let him throw a price out there?
  6. B

    002 permanent mount

    If you use PT wood get the ground contact stuff. Most of it isnt rated for that. Pouring a slab or making a gravel pad is easier than finding ground contact stuff here. My 802 is on a 1 1/2 stone gravel pad 8x21ft.
  7. B

    Ran first MEP-803a test on the house

    Im sure your pool pump can be turned off for a few hours/days...first world problems. Lol
  8. B

    MEP-803A Outlet box location on right side?

    You may want to use a twist lock on that part.
  9. B

    Fuel Screen on MEP-8XX cleaning?

    Paint thinner/mineral spirits. Let it soak and use a tooth brush to scrub it. Soak it again then use a blow gun.
  10. B

    Low Oil and stupidity

    Guy have you tryed leaving the oil cap off and starting the set?...lol you only do that once. It may run at a vacuum but oul mist/drops come out of there like the crank is throwing it out. Get the cap fixed, fill the oil, clean the set then run it to properly see if anything else is leaking.
  11. B

    External Filter on MEP-803A Aux Input

    The idea is the water is bigger than the micron of the filter and drops down in the bottom of the bowl. At least thats my understanding of it.
  12. B

    MEP 831a and NOCO G7200

    I would just fix the charging circuit properly. Useing a battery charger for as an alternator would be my last resort..for when the unit quit while it was needed. These new battery chsrgers need voltage to make voltage. So if your set will start with batterys that have 23v the charger may not...
  13. B

    MEP-803a expansion/freeze plug leak

    You might have to take it out to measure it. It would be a great time to add a block heater if your in the climate. Make sure you get the correct sealant to install the new ones and flush the system when your done. The goo coming out of that engine dosnt look good.
  14. B

    MEP-002 noise when starting

    Noise when its cranking? That could mean missing teeth on the ring gear. A new starter could help but not for long. If you suspect this i suggest taking the starter out, put a mark on it then turning the engine by hand to check the ring gear.
  15. B

    MEP-803a Falls on its face under light load

    Have you done all the normal maintenance items like filters and fluids? You can also reset the fuel pumps on the rack by turning them. I suggest you read the TM on how to do this. I would do filters and fluids before anything else. Then get your self 3 5kw electric dryer elements to stop...
  16. B

    Cut MEP-803a fuel return lines

    I believe the cut line on top of the engine above the gen head goes to the return that goes towards the tank down by the engine oil drain valve in your second pic....so both of your lines in the pic, connect them together. Daybreaks contitech part number is good and is about 25ft of hose. More...
  17. B

    MEP 802A Fix-up Thread

    " ultimate well nut thread", here: https://www.steelsoldiers.com/showthread.php?171091-Ultimate-well-nut-repair I had the top one leak when i really topped off the fuel so did both with the ultimate well nuts. Its really just a bulk head fitting for a plastic fuel tank.
  18. B

    Fuel type

    With this style of pop off injector/fuel pump running some 2 stroke oil even in diesel wouldnt be a bad idea. 803/2, 003/2 generators that is.
  19. B

    MEP 802A Fix-up Thread

    Did you get the metal well nuts to replace the rubber ones? The metal ones are a better design.
  20. B

    MEP 802A Fix-up Thread

    What kind of parts and repairs did it need?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks