Search results

I forgot to mention it but that is what I found after asking Utah DMV and Highway Patrol. DMV was not so sure, but HP told me a Class B is required.

Thank you Sir!

I finished my roof rack/LED light bar frame. Now I need to mount and wire the LED lights. I am also going to add a flat plate of steel for antennas. I have my Ham license and I want to put a few other antennas there too. It is going to take me awhile to get the rest done because it is really...

I have done a lot of research on this and although the laws vary from state to state, there are Federal laws that say anything over 26,000 GVWR a CDL is required. So if you comply with your state laws but then drive across a state border, it is possible that you could be pulled over by a HP...

Looks good! Where did you get the box for the speaker? Sent from my SH-Z01 using Tapatalk

I put on some Angle Iron so I can mount some LED lights because the headlights are worthless. I do not want to drill any new holes in my truck because I want it to remain as "original" as possible. So I used the holes for the weapons kit to bolt my Angle Iron on. I plan to put some additional...

NSN: 6220013382062 Oshkosh: 2GE893 Noun: SWITCH ASSY,TURN SIGNAL

Efituned, I wonder if the microprocessor is really not available. I know many places to get old outdated parts and my brother is an electrical engineer at Texas Instruments. Well, he was until he retired. I bet we could find the part. It may be an issue of not being able to replace the...

Hi Karl, It is good to hear from you. It has been very cold here and I would hate to be in Fargo. I moved because I did not like the cold. Mustangstud, Here are the part numbers for your turn signal: NSN: 2540013556593 Oshkosh: 1881060 Noun: HANDLE,TURN SIGNAL There is one for sale on...

So I was looking through photos of Marines and their 7 Tons (my favorite thing to do) and I noticed in one photo how their secure the cab of their trucks. They just use a chain and a lock. The chain should be over 28 inches long. I recommend a lock instead of the twig I used. I would not...

A little bit off topic but what happened to all the other non runners that I assume were purchased as parts trucks? Someone should have a non runner that they could sell the parts off of.

MAdams, it would be great if you added a link to your hub oil videos here!

I watched MAdams's video about changing the axle hub oil and I saw he had water in his. I got worried so I thought I had better change my hub oil too. I really just wanted to see what was in there. Not water I hope! Well, the good news is no water. The bad news is that all 6 hubs had some...

So I was playing around with the bolt for the cargo bed seats and I found out the correct size for the seat to bed side is 3/8 of an inch. I bought a few pins with the retainer and so now I can take the seats off without tools. Of course, if you need room in the bed, you can fold up the seats to...

OK, I found all the bulbs now. So my truck has all LED bulbs front and rear. I used Red LEDs for the rear (brakes and turn signals) and White ones for the front (turn signals). On Amazon the bulbs are: iBrightstar Newest 9-30V Extremely Bright 1156 1141 1003 BA15S LED Bulbs replacement for Rv...

I would love to put on door locks but I have not found anything that will work. I secure mine from driving away by putting a lock on the battery switch. Here is the thread: Lock for the battery switch

Elijah95, that is a beautiful truck!

https://www.dvidshub.net/video/704446/clr-3-maintenance-video-mtvr-grease-points

I am sure it is possible because the Wrecker and the Dump versions have the PTO. They use the PTO to drive a hydraulic pump. I think I have even seen the PTO kit for sale somewhere.

Hi DirtyDirk, There is a sticky that has the list for down loading the spreadsheet of part numbers. If you want the complete list, then send me your email by IM and I can email the list to you. Jon