Search results

Exhaust? Heat shield and what year is this M1009?

OK I have another idea for the sound. You may laugh but have you checked the door strikers on the B pillar? That can cause that drive you crazy sound you are describing. Check it. To see if it is the issue put a rag over the door strikers and slam the doors. Go for a ride see it that helps. A...

Perhaps you could show him a picture of the grease gun attachment. You seem quite handy with the magic box.

Bingo That's the one. Thank you from far away South America.

No this is a semi flush fitting back in the center of the constant velocity joint. At the rear of the front drive shaft. Between the 2 u-joints clean that area and you will see a small round fitting. You need to grease that fitting until the grease pushes out of the ball of the CV joint. you...

Best advise I can give you is to remove the front drive shaft and clean up the CV joint and find the recessed grease fitting and grease it real good ( Special grease tip) and clean it and work it back and forth and grease it again before you reinstall it. Under normal use that will take care of...

Check the constant velocity joint at the transfer case on the front drive shaft. There is a grease fitting inside the joint that you need to grease occasionally. I hope that helps you.