Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Has anyone tilted their SEE cab with these brackets? Or know of an alternate source for the more common style? I've been unable to get a response from EI.
Thanks
Hey Grinder,
My suggestion is to read through the "FLU419 SEE HMMH HME Owners group" from cover to cover. Then read it again. It will give you the most common issues with these machines and provide a good guide for what to look for during your inspection. If you are looking to purchase from...
And, as a bonus question to my Starter experts out there, do I even have the correct starter? The Bosch part number stamped into the case of my starter is 0 001 368 035. From everything I can tell, the original was Bosch part number 0 001 368 028. I've been unable to find any sort of cross...
My SEE arrived a couple weeks ago with a starting issue. The previous owner was kind enough to remove the starter prior shipping, which did have issues and has since been rebuilt. So far I haven't found a clear diagram of which starter connections go where. My harness appears to have the...
FluFarm posted and rtrask verified the standard NAPA part numbers for the three belts in the FLU419 Owners Thread. Don't recall which is which off the top of my head.
Spud
I would say that the overall feeling from the SEE community has become increasingly negative over the past couple years. From issues people have had with their machine it's easy to become pessimistic about their purchase. As these became increasingly released into the wild we saw what appeared...
Most of my rubber connector insulators are disintegrating. I would think that this is probably a common part on other vehicles besides SEEs. Anyone recommend a source for these?
Thanks,
Spud
I'm searching for a replacement reservoir assembly that is located under the hood on the passenger side. The TM has it listed as 2930-01-242-2991 TANK,RADIATOR,OVERF. Also, if anyone purchased multiple wiring diagrams from General Hood as is willing to part with one, let me know.
Thanks
Thanks for the great advice Peak and Speed. If I can get in there with a tool, i’ll Try to reshape those teeth as a first step. My opportunity to tilt the cab. The starter looks to have replaced at some point and shows very little wear on the gear. Without history of this issue, my concern...
I have an issue that I don’t recall seeing yet on the forum. The ring gear on the flywheel is damaged and will need to be replaced along with the starter. I’d like to understand the cause of the issue so hopefully many of the FLU experts are still monitoring this thread. If anyone is willing...
I finally received my FLU yesterday, delivered to Northern Wisconsin. Overall appears to be in good shape. In preparation I did read through this entire thread twice. Thanks to all of you that contributed to the wealth of information in here. I’ll post a couple pics soon.
Spud
Quote needed to move FLU419 from West Yellowstone to Northern WisconsiN
Need to ship a FLU419 from West Yellowstone, Montana 59758 to Harshaw, Wisconsin 54529 (Approximately 1270 Miles)?
Vehicle non running.
Ideally a deckover trailer either tilting or with ramps, to support 16,000 lb, and...