Search results

Harbor freight ,2" receiver pins.

Stops installed.

Rear deck bracket installed and bike stops installed.

Over built,I know. Worked on the bike stops today.

LOL. I'm a over builder. Maybe my Rhino ?????

Side support installed.

Just a note. I can fold the end section ,OK. But I almost can't do the two. I'm old. But will work on a chain system to help with that using the winch.

Depending on the year AZ has more boats per-capita than any-other state in the union. Been out west from Mich. since 83. The boat Biz is good.

Deck all welded down. Now on to the bike mount.

Cut out the decking. Trying the tire stops for best fit?

Quick Release Pins . ? From my tool box and a old race boat project.

New up lock.

Fitting. Think I will go with the decking next and then make the bike stops ? They will need to be removable.

No, but thanks ! Just a old engineer / hack.

Other end of the deck welded.

Worked from 100% grade and the 2 to 1 will help with the brake. But its a good point. Its the difference of a winch and a hoist. But I think I'm good.

I have used 3 of the 2500 lbs. and only problem was the brake system on one. Would not hold very well at 1 to 1. with 1000 lbs. And their very noisy ! With just the lift its at about 300 lbs so the pull is 150 lbs. Max test is with my fat ass (about 200+-). With no brake problems.

The main problem was the cable,pulley system lifting a different speeds and jamming. It was a 4 to 1 system. It worked but not well. After more testing I came up with a system that is a 2 line to one and its 2 to 1 . The big problem was trying to get 2 lines to wind on the drum of the winch at...

Just a note. The lift system has been tested and it works. But not to my standers. Going to rework it and see if I can make it work better. Don't try to build it this way .

What about the manual fan ?