Search results

I am sorry, I meant automotive jumper cables used for jumping cars with dead batteries. 2 cables with quick clamps on both ends. I always have a set with me on the trail and have come in handy in many situations. In this case to jump around a section of cable that may have a bad connection in it.

The way I check this type of problem on the trail, may be applicable here is. take your jumper cables hook the red clamp to the positive post on your front battery - take the other end and hook it to the positive post on the starter and try it (your simply bypassing that section of wiring). if...

OK found the cast pan in stock at https://yourcovers.com/transpan_9437.php for $260 or search (PML 9437 pan) for more options. This pan does not hang down far enough to be a problem and fit my M1123 like a glove. good luck with your leak.

I went with this pan, cast aluminum deep sump with drain plug, fit great - slight mod to linkage on left side to accommodate the thicker flange on the cast pan. CT powertrain Products 34-4L8-840A-Deep cost was $250.00 ctpowertrain.com 1-888-828-7697 I ordered mine on-line but it shows...

White smoke is usually coolant but it takes a lot of it to make smoke and since your coolant level is OK then it must be blue-ish white smoke which is motor oil. If the unit runs good, no missing or dead cylinders and since it's not puffing like one cylinder when it fires and it's not constant (...

Building on Katavic,s thought, Place trans and transfer in neutral and roll the unit, your choice by hand/hill or tow rope. if it still rolls freely shift transfer case into High and see if there is a big difference, if their is I would look at the transfer case if not I would look to the trans...

I am concerned about your statement that your using Lucas Hub Oil - the stuff is thick like honey. Nothing against Lucas that have great product it's more about thick like honey. These hubs use strait cut gears, unlike helical cut gears that tend to pump oil from leading edge to trailing edge...