Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I found the invoice and here are the nsn (they don't say which is which):
7372720 Weather strip
7372721 Weather strip
7272722 Weather strip
Need 2 of each. I'm not getting the same numbers when looking at the parts TM.
Email: aaamilitaryparts@yahoo.com
Based in NJ and AZ.
Sent from my...
Found a shop in northern Colorado that can make the 5 rubber lines with Peashooters parts list. Under $220 with shipping.
Sent from my SM-T320 using Tapatalk
Peashooter, on the drawing for the A2, you show the main frame line F3 as being 97 inches. Is that the total length front to back or the length of the 2 lines from the T block?
I believe they did but it's been over a year since I tried them in the dark. I have a spare dash panel with gauges that I test with in the house.
Sent from my SM-T320 using Tapatalk
I pulled the radiator to get the fan shield fixed and figured I'd change the thermostat while I have the room to work. I got the housing out but now I cannot get the old thermostat out. It will not move at all or turn in the bore. I've given it a soaking in penetrating oil but I'm if anyone...
I carry a pair of Larson Scientific amber 24 led lights (CS-A-24LED). They have a magnetic base so I can attach them to the truck. These have 2 modes, solid and flashing. The flash rate is faster than I'd like,but they will get peoples attention. Runs on 4 AA batteries or 12 volts.
Sent...
I repainted my M35 over the winter in my neighbors RV garage. Used a brush as I could not spray inside.
This is what the truck looked like when I got it home:
And after it was finished:
Now I'm working on the inside of the Cab and replacing the old nasty open cell foam on the back of the...
Tried to pry the end cap and only the flange broke. Tried to drift the bolt out with a punch and that did not work. Too small an area to get a dremel cutoff disk in.
Sent from my SM-T320 using Tapatalk