Search results

Saw your old thread , I found a TM that states the on highway ratings

My plate is lacking the numbers,but found some numbers in print

That's an odd one ,hopefully one of the more knowledgeable members chime in.

Sounds like a head gasket.

Congratulations on getting though all the variables that this project threw at you.

I have installed my first outboard drum on the factory M931A1 brakes.Used the factory A1 studs and Webb 61577B Durabrake 14977 Automann 151.5703 or Gunite 3219ax drums ,hubs need to be machined to 5 thousands clearance in the area outside the bolt circle with the studs installed .the studs cause...

More pics of the truck and the conversion to outboard drums

Well I went ahead and figured out the best drums and the machining required to do outboard drums on my M931A1 ,Here are picks of the first one.

I have talked to Meritor AM General C&C equipment and No luck on any axle specs more than hear say Even asked Memphis equipment were they got there info and they didn't really know.

This is how my PTO worked out ,I would be checking to make sure there is room for your hoses to go up out of the pump.

That's the safety bar that swings up to make sure the box can't come down and squash me.

That's a rubber strip that gets glued to the frame to prevent wear and noise on bumpy roads.

My weight tag is blank ,does that mean I can carry anything or nothing LOL

With my truck we had to bridge up and over the transfer case to do the front mount hoist because the case goes above the frame

Air shift PTO with direct mount pump,not sure of the PSI or tank volume. I hired the job out because I work full time and I wanted it done for the spring.they did a great job it has all the good stuff .

This is a M931A1 with an aftermarket box ,if you want all the good stuff it's not inexpensive .

That looks like a nice upgrade, how would it fit in a M931A1 ?

I would be interested in seeing a picture of that reinforcement .

I think we would be getting to where the strength of the frame would be the weak point. Your thoughts ?

If your not set on a M931A1 you could look the specs on a M916A2 ,double frame bigger axles more power.More money though