Search results

Oh and thanks for the compliment!!!

They were a kit I bought off a guy. But they can easily replicated. Ford Calipers. Wilwood disc'. My buddy whos a welder, my dad and me built the bed this summer. Quite a project.:grin:

Oh I forgot to add Air-O-Matic, pyrometer, and bypassed my FDC.

Bobbed, super singles, flipped hubs, Ouverson lock-outs, 4 wheel disc brakes(NICE), spin on oil filters, spin on primary fuel filter, side exhaust, round 40 gallon fuel tank on driver side(original is gone), custom flatbed, repainted black, electric wipers, new dash, changed height of my bench...

I work at Oriellys. We have duece oil and fuel filters in stock in Wix. Had Mobil delvac 15-40 on sale a while back for $7.99 a gallon. Wheel bearings and lots of other parts we have in stock or can get. Have got parts from OD irn, Boyce, Dodge City, and Memphis Equip and have been happy with...

Thank ya. Lots of work in it.

Heres my home made bed. Finished it a couple months back. 1/4 inch treadplate and 4 inch tubing.

My bobbed truck weighs 10,080 with me in it(165lbs) and a half tank of fuel. Disc brakes and my own homade bed help with I think. With the fdc bypassed it flat runs. Have to drive it according to the pyro.:twisted:

I have the TM in printed form and on CD and have done some studying on the reg.. Drove it today. Not really too worried about the pressure anymore. Had 25psi when warmed up at idle and 60-70 going down the highway at 2500rpm. My dash gauge is mechanical by the way. On this oil change i switched...

Yeah I'll likely take it off. The TM shows a mounting gasket. Would RTV silicone be ok it its place? Ive used it alot before.

Yep. same truck. a year later. opposite problem.

I have a mechanical oil gauge allready installed. How does the regulator exactly work?

Last week my oil pressure wasn't really too low or too high but was just acting funny on the gauge. So today I changed oil and filters. Now the pressure at cold idle is 60 psi and will go up to 90psi when the engine is ran faster. In the past ive noticed the pressure will go up to 60psi while...

Thanks for youre input guys. Im off tomarrow so I'll be digging into it.

Thank you Westex!!! That's good to know. Ill measure mine tomarrow. The fuel in the oil is a good idea but my FDC was bypassed a few months ago. I'll let you guys know whats going on when I look at it Thursday.

The past few times ive ran my truck it seems the oil pressure is lower than normal. I have jatonkas spin on filters and now i get oil pressure as slow as i did with the old canister style. Also when you rev it up some and let off, the oil pressure goes down to 15 psi or so then back up to 20-25...

Howdy. Ive finally got some work done on my custom bed for my bobbed truck. Question. Can I weld on the bed when I get it on the truck without blowing up the electrical or causing harm to the truck? And no Im not welding anything directly onto the frame. Thanks for your input. Oh and pics will...

I tightened my axle nuts too much the first time i repacked mine. Lets just say I can do the job in record time now. Lesson learned:roll:

Thanks!

Howdy. What # wire in the harness goes to the battery gauge? Thanks for the help!!! Will.