Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
24 volt glow plugs ??
I notice above that "welmans are 24 volt "... When in a proper operating cucv system
is there 24 volts on the glow plugs??
charles
need the complete set,all 4 sides the screw into the bed to attach the
vinyl crew/radio top to the bed of the M1008A1 pickup.
Thanks
Charles
Portage Mi
I think that most pizo's will take the higher voltages and if you do the Resistor bypass
A VERY GOOD IDEA no trouble, also I like to monitor the Hi current output side of the relay as if it sticks closed or you have a loss of feed voltage to the relay you will know it.
Charles
WD8AXA radio Guy...
After all the posts of sticking on or off glow plugs and the like, I am going to install
a GLOW PLUG ALERT. Buy (at Radio Shack) a 12 volt Piezo beeper, mount under hood,
and wire the positive, or red lead of the piezo beeper from the heavy glow plug wire output side of the glow plug relay...
what does the heating element do in the filter base? how is it tested,its electrical so it should fail in a cucv but I never here mention of it .
Charles
Portage Mi
I am trying to make a new stanadyne Model 80 filter base, I still need the
bleed valve parts and the water in gas switch sensor.
any one know of a stocking surplus dealer who may have the whole thing NOS
or a parts source?
Thanks
Charles
Portage mi M1008A1