Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks the fan does not move back and fourth when i disconnect TDM and the sound doesn't change . the fan can not be moved when the truck is not running which i understand is normal.
Hi all, I’m working on my 2004 M1123 with a 6.5 non turbo. The radiator fan clutch stays engaged all the time. I have changed the Fan Clutch solenoid valve, Thermostatic Fan Switch and the Time delay module and still no change! Any help would be greatly appreciated.
Thank you in advance
I like your mount for the tach. I'm getting ready to install one and was wondering how you fabricated the mount? I also noticed you are in CO as am I not far from you and would like to buy one if possible
thanks
Hi all, does anyone know were i could find the straight rubber coupler on the bottom for the snorkel. I have noticed some of the HMMWV use this to raise the standard intake cap
thanks in advance for the help
Quick question i run with a group of HUMVEE owners off road - most M998s and my M998 rides considerable rougher and harder. all the tire pressures are the same around 25 PSI. Did HUMVEEs have different suspensions? Do some have a softer ride?
thanks
Thanks in advance for the help. I have changed the glow plugs on my M998 and didn't pay attention to which wire goes to which plug. Does it make a difference?
Here is the update, installed a new Glow plug controller & protective control box matched set (KDS Smart System) check all the glow plugs all good. Now i do not have a wait light. The old box the wait light came on. the new parts no wait light and the truck does not start. i pulled a couple...
thanks checked the glow plugs and all metered out at 1.7-1.9. what is interesting is the plugs look new and well as the control box under the dash but the plug controller on the engine does not look like it has been changed. is the reading acceptable for the glow plugs????
sooooo i bought another M998 with a 6.5. Batteries changed and new, the truck cranks and pushes white smoke from the exhaust but will not start. i used starting fluid and got it started and ran all day and started no problem. Parked over night and now it will not start again same as before...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!