Search results

anybody have one laying around they are willing to part with? Im tired of loosing stuff on my dash because of the huge holes and cracks. Thanks!

Que? Do you mean gears? Probably 4.11's or lower. (it was a Cab/chassis truck). Hopefully everything goes well with the final purchase, im leaving in a hour to pick it up.

Ive only owned my m1008 for about 3 weeks, and this project has changed about 3 times! The original axles are going to be stripped out for a friend of mine. So as of this weekend, it will be a non-ton. I scored a 85' chevy dually with 454 sm465 np205 4x4 for 600$! and it drives! So now this...

Ive researched how to do/ where to look for this conversion, but all of the links are broken (I guess its been along time since somebody brought this up). But what is all needed for the BBC/ 3053a combo? Also, are 3053a's worth swapping in a BBC if they cant hold more than 400 ft lbs of...

They actually make 6 lug conversion hubs for the ff 14b. I think i saw them for 800. Also motor, the "latest and greatest" 14b is in the 01' and up chevy HD's. They are 11.5" ring gear. Parts haven't caught up to them yet, they are still expensive. I'd still prefer the older ff 14b's. Cost...

gears.

I would invest in a new parts store replacement flexplate for 80 bucks, and like mangus says, inspect the converter. Also invest in a tranny jack.

Thats the way i wanted to go. Then I made a cost list, and i abruptly changed my mind :roll:. One day.....one day. Hopefully you are going to post the sidewinder install :-D

10-12 mph is about what they get. You should drill the air can, if the truck has more than average power gains, then your pump is turned up already. My pump was turned up when i got it. Also, when in 2wd high, the truck is a dog. The reduction in the xfer case helps with power in low. Try...

Very interesting! a blazer on mogs! BC4x4.COM four wheel drive, 4x4, offroad and fourwheeling site. This might be an option for me! :-D

This might interest you. I was thinking of buying a banks kit, now Ive' seen the kit this guy is putting together. Although he has a built 6.2, im reluctant to build that much turbo for my stock motor. Banks is a good choice for a stock 6.2 setup. Cant wait to see what it does to your setup...

now just show us how to fab safari doors!

Thank you, ive been waiting to do this. Tired of slamming the sh*t out of the doors on the trial.

nice! I can use a 6.5 td for my m1008. Going to subscribe to this build!

apparently 24v aircraft cables, original spare tire, lots of beer cans and boxes of generic gi-joe boxes in the bed.

First check if its in 2wd. When I got my m1008, my friends and i could figure out why it wasnt going into 2nd (or 3rd). It was in 4w-low. After we unstuck the transfer case shifter and put it in 2wd-hi, it shifted fine, then went back to 4wd to see if the hubs worked. I tell you what, at about...

Hopefully only the spring perches in the rear need to be changed, im guessing. :roll: All this to keep the truck rolling.....i need my diff's!

Ive seen a guy machine a Klune between a t400/205. Pretty sick because you can run even higher gears for highway use! High Impact - Klune-V Extreme Underdrive

That thread has to be the longest I have ever seen. I think my eyes want to bleed, but it was worth it! :-P

I got the idea from the project CUCV in offroad magazine. I need to find a 60 front because i already have 39.5 tsl's waiting for the truck.