Search results

I started to take the fenders and bed off for painting and it got me to wondering, where do you buy the odd-headed 3/8-24 fender bolts? Also , what grade are they? Who has the best and complete carb kit? Mark 1952 M-37

Jay, If you want to improve on the action of the wipers, you can add a vacuum can. On the M-37, the vacuum comes from the manifold thru the double stage fuel-vac pump to the wipers. If you are missing the fuel pump or running an electric pump the vacuum will vary depending on throttle position...

If they only go to one side and stop, they are gummed up inside. A hint that I got off the Bronco forum was that in the 50's and 60's, they would dunk the motor in kerosene and pull it thru using the vacuum. Take off the front cover. Under it is the vacuum switching valve. The valve has two rods...

I need to rebuild the ETW1 carb on my 1952. Someone said to get an article on rebuilding and govenor adjust from Alan Bowes site. He has taken the site down. Can someone re-post it? Thanks. Mark

Does anyone have to sell or know where I can get a Trico lever for the backside of my vacuum wiper?Enclosed is a picture. Mark M-37 1952

Chuck I noticed that you are a Ham. Are a lot of MV people Hams? Sorry to be off subject. Mark N8QHN

Thanks for the regulation Chuck. Since I will be using a 1952 plate and registered as a historical vehicle, I guess mounting it on the tailgate will be alright.

They just had a TV story on that there is a $85.00 fine in MI for no lic. plate light. I called the sec. of state office in Lansing last week and they told me that new plates are reflective and needed no light.Where do you put the plate and do you light it? I was going to put it on the tailgate...

If your truck is going to be on the road alot, what do most people do about rear lights? Keep stock, gamma goat lens, or M-35 new type? Thanks. Mark

Does anyone have the dimensions and thickness of the front and side glass? Mark

Hope everyone had a good Christmas. In looking at many M-37 pictures, the rack behind the cab is missing. I went and looked at mine and it is missing also. It looks like you need a center bolt in bracket and two 90 degree slotted brackets for the corners. Can you buy the hardware or do most...

What is the proper primer and paint color for a 1952 Army M-37. Also part numbers and sources please. Thanks Mark

Thank you for all your help.If I had looked in the electrical section and read past posts,I would have had my answer.It sounds like from past experience that all 24 volt is the way to go so battery life will be the longest. Also, even thou it is a little more expensive, the Hella lights with 24v...

A 12 or 24 volt non-military turn signal.

Hi All! After a short stay in the hospital and 4 weeks of e-bay and reading, I got an all clear on my prostate cancer at the age of 52. Now to put on all the parts I bought. Which leads me to this question. Since both headlights are burned out and I'm re-wiring a signal-stat 900 to a new set of...

What is the model of the transmission in a 1952 M-37? I need to start looking for shift tower parts. Thanks Mark

Hi Everyone. After 35 years of looking for a M-37, I found one in Charlotte ,MI that came from the group Jeff Branch Motor Sales sold in the late 1960's. I was 12 years old and my parents bought one for my brother to use to skid logs. He taught me to drive and I learned most things about auto's...