Search results

You should PM 100Dollarman (aka Mark aka Hundy). IIRC he has bobbed a truck or two before.

Thanks for editing out that flag mount breaking off. :driver:

Sun SHINE WINNING You should be jealous. :)

Dual alts just look really cool............. http://www.steelsoldiers.com/deuce-modification-hot-rodding/62102-dual-alts-some-pics.html :driver:

What's this "rust" you all speak of? I think we outlawed it in SOCAL. :driver:

That load isn't even making that H53E work hard.

I would think with all the $$$$ you're making (with all those wreckers being busy), you could afford to buy your dog a real bed. :)

This winch replaced a 3K HF winch. That POS wouldn't even pull the small ATVs in.

Four 1/2 inch grade 8 bolts. The three seen in the pic and one more unseen. Two mount the bracket to the wall, one holds the winch to the bracket and more holds the winch to the back wall. The winch was designed to be mounted with two bolts. I didn't use the crap bolts it came with though...

Here are a couple pics of the light duty winch I put in the bed up forward. It's used to pull loads aboard, mainly the ATVs, but recently a heavy, 20 foot work bench. The mount is actually a L bracket bed mount from a deuce frame.

This is my set up. I moved the hi beam indicator over to the left side of the dash.

That's NOT a joystick in my pocket............................ [thumbzup]

I just used an off the shelf gauge from AutoZone. Not exactly mil spec, but I put a crappy paint job on it so it looks like a bored soldier did the work.

Bounce that against the most recent TM and some chatroom gossip - The GL1 replaced a BFH. Noob...................

What I want to know is WHY would you need to get to SS via Google? SS is always open on my computer 24/7/365.

It's a design flaw implemented by a hall monitor bully. You would know this if you used the SEARCH feature or read the TM. Lube your keyboard with GL1 and you shouldn't have any more problems. :driver:

Just loaded up my 20 foot work bench from my old garage. We even left the huge vice and grinder attached. Ran a 4 x 4 across the sides in the back and then tossed the 3000 lbs bed winch cable over it and down to the bench which was on it's side. A couple people helped lift and guide it in...

99 times out of 100 the question is NOT "Where to fin a Hemtt", but "Where can I find the MONEY for a Hemtt". If you have the money, you can find one.

Seller says the part number is - 07382-TAC. It's a route clearance light.

I asked him for a pic of the back or a part number.