Search results

RE: Re: Going to Jim Thorpe this weekend? I plan on being there also on Saturday morning.

I needed more head room in my deuce. The air actuated wiper motors were always in my line of vision. I removed the spring and cut it down by one coil. Then I found the electric wiper kit and that made it better!

There is an article I wrote a few months ago comming out in the next issue of MVM on this subject.

John, Did you happen to take some pictures of this event?

Of the 2 types of air packs for the deuce there is a kit for the longer style available. Does anyone know if there is a specific kit for the newer style shortened air chamber air pack? Where can I get one? Part number? Thanks Guys!

I have some 105 trailer parts for delivery to Jim Thorpe for anyone that needs them. The full list and prices are in the calssified section or pm me with questions.

RE: Re: RE: Question about diesel fuel in the crankcase Tom, Where do you get the o rings?

Will there be anyone with their notary stamp attending the show on Saturday? Any Pa transfers require a notary to verify signatures on the back of the title.

Still looking for the cleaning rod and brush for the bore, a sight with mount and a box.

THIS is topless!!!

RE: Re: Deuce vs couch unfortunatly, I was in the cab during the crushing process. I could not see over the hood to take the picture.

On occasion, one of my renters will redecorate and dump the old couch by the dumpster. The trash guys don't always pick it up so speed the process, I put it in the dumpster. In order to get it in the 2yd dumpster it needed to be broken up. What better way than to crush it with the deuce. One...

Here are the pictures of the hubs installed and painted to match the truck. I ireinstalled the rear most drive shaft and took it for a test drive. I also removed the tow bar from the bumper to its new home in the bed. Steering (with the air assist) was noticily different (easire) most likely...

Does anyone have one in pdf form?

My deuce fits in with the ring and convoy lights with the metal guards on them but not the gun cradle. I am running 9x20's and lowered the ring mount to just above the canvas top. I had the building before the deuce came into play. Go higher, you may want a wrecker!

Not sure about filling in the 2x4 and 4x4 designations. Maybe in the future "lock "and "free" could be a consideration. It dosen't matter to me either way. I wanted the lock-unlock capability so what it's called dosen't matter to me.

I just received my new lock out hubs from John Tennis and here are a few pictures of the hubs and measurements showing the difference in height compared to the stock hub. The "kit" included replacement hub gaskets, instructions, and 2 hubs. The instructions mentioned removing the hub top cover...

hmmmmmmmm, maybe some one can work with the above information and cause some serious inconvenience to his credit rating.

there is an adapter required.

RE: Re: Missing parts! Vinny, get the wife to give you a push start! (Sorry i had to throw that in as my wife hates green/tan iron)