• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. D

    Trouble starting Deuce

    Hears the story, Started the deuce moved it 30 ft. shut it down, went back to start it, wouldn't turn over just a clunk. I have replaced the starter and the relay, still a clunk. The amp meter in side the cab gets nailed when I push the starter button, so theirs a short somewhere. I have checked...
  2. D

    m35a2 Starter and relay wiring

    Thanks, I understand about the wires, but the wires in the manual and the way their connected between the relay and the starter is different from what I remember when removing them. So that's why I'm asking for the pic. Again thanks for helping me.
  3. D

    m35a2 Starter and relay wiring

    I started my deuce the other day no problems, shut it off, tried to restart nothing. sounded like the starter, removed it found teeth broken so I replaced the starter. Still wouldn't start, so I replaced the relay, but I made the mistake of looking at a maintenance manual before I rewired and it...
  4. D

    valve replacement

    Can anyone help with info on replacing valves on a 1970 M35a2 non-turbo engine I believe it is a LTD 465 Thanks deconn
  5. D

    M35A2 Engine stop Pics/Vids

    Does anyone have pics or vids of a 1970 Kiaser/jeep M35a2 Engine stops insides? Wire that holds screws broke and they came out. We have the parts but are not shure how they go back. We have a paint brush looking pin and a washer with 3 small tabs. We were getting ready for the parade tomorrow...
  6. D

    Problem with Engine stop

    We removed the fuel control rod, but while cleaning it we did loose the tab on the end. Can we replace the tab or the whole rod and where can we find it? Thanks Deconn
  7. D

    Problem with Engine stop

    The fuel cut off lever. Deconn
  8. D

    Problem with Engine stop

    I have a Kieser/jeep M35a2 1970, with a White engine, the engine stop won't work. We took it apart and found that it was gummed up, once we cleaned it, it seemed to work better but it doesn't spring back. Anyone know how this thing is supposed to work, and where does that spring loaded plunger...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks