Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
MEP 003A, Engine Runs, No Voltage
The MEP 003a I have was refurbished by JimC and includes a replacement of the analog gauges with digital. I do hold the switch at start for at least 10 seconds. At no time do the gauges show anything. Since I replaced the VR board, the main suspects are the...
Hello profo (Marty). New rotor / diodes / bearings for $100. Done!! Hope you take Paypal. Contact: mobilefloyd@yahoo.com (Larry)
Triple Jim. I scratched around in my tools and came up with a Fluke 1587. I'll test with it and report back on results.
To Chainbreaker: I noted on receipt of the unit that this switch was resistant to turning. I'll exercise the switch per your recommendation. I failed to mention that I am not getting power at the control box -- would this switch effect this as well?
To Buyfank: I performed the check per the...
Hello TripleJim,
Thank you again for the Mouser part numbers -- you saved me money and time. The other sources were more expensive and were on backorder. Also thank you for a more detail on diode testing than is in the TM.
Hello All,
Brand new to the forum. Last month I got an MEP 003A off ebay that was guaranteed to work. It didn't. The cost to return the unit od prohibitive. So it is no my problem.
I running down the diagnostic found on page 2-9 of TM5-6115-585-34 while praying that this is not an open...