Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I just put the one 50 on it and it runs with voltage now and the outlet works on unit with a fan running. So I need to get the 2 of the 7.5 and stack them on back side like it was? I’ll send pictures
I have finally got back to my project that I laid down to chase other things and got my parts ordered and now that the hurricane season is in full swing went back to put the resistor on that I bought from the web site and realized that R14 has 3 of them stacked on top of each other 2 of them...
Ok thank you very much for all your help. Not sure how to make it worth your time but just thank you seems cheap! Yes I’m becoming aware that I probably got lied to or previous owner has dementia because there are becoming a lot of little things that look like somone been tinkering and didn’t...
Not trying to beat a dead horse and keep asking same questions but do you know of anyone in North West Florida that is a mechanic like yourself just in case I need some help in future
Ok thanks! I haven’t googled it yet but is that something I can order online or where is the best place to order parts from?
I also notice my batteries are being drained down would this at all have anything to do with the R14 ?
Thank you very much for your time and support and will support page...
With dead switch off and AC Reg wires 1&3 off they oms out at 32.
With wires 1&3 still off and machine running and S1 switch held to start..
R14- Leftpost 24v / Rightpost .2v
CR2- Leftpost 0v / Rightpost .2v
R14 left terminal- 24volts
R14 right Termnial- .4 volts
CR2 left terminal- .4volts
CR2 right terminal- .4volts
machine was running and was holding switch to start while checking post in DC
I’ll send picture of post I was checking and called them left and right because unsure of which one is 1or2
I do not get any reading of any AC except 11volts at the outlets with the unit running and switch held on start. I tried the battle short switch to see if anything happened but nothing. I’ve held reset button with machine off and while on.
Good afternoon
Sorry for the 2 threads I’m new to posting on forums.
Yes at this time you can delete the other thread I have fixed my issues with the S1 switch after I was about to take switch apart I began looking at a diagram of wires and realized it was totally wired wrong which caused the...
I sent a picture of what I think your talking about
I’m not with generator now but will double check in manual the reset button your talking about
Thanks for your response
Well after Digger556 suggested stuck switch or relay I went down a rabbit hole! Started with the switch, and after about several hours and looking thru this forum I came to the realization that even tho the previous owner denies any work being done to it and was running well last time used, I...
I will double check which manual I was using but was attempting to follow the steps it had me starting out checking the Governor control unit which I think is A5 which if I did right had juice to 1,3,5 while until was running but wasn’t sure if I was supposed to have a relay so it wouldn’t crank...
Afternoon
I’m new here and just bought this Gen. It was supposed to be ready to go after all fluids changed it had not run in 2 years supposedly.
I posted earlier this morning because I could not figure out why my Master switch would not crank on the normal setting and would crank in the Aux...
Thanks for your response! I have been digging in manual online but want to order or c
Thanks for your response!
I have been digging thru online manual but I need to just print off or buy them! Still trying to find my way thru them I’m better at pictures 😂 at any rate I will show my stupidity by...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!