Search results

Not bobbed, but the state has it down as weighing 16000 lbs in DMV records.

Unfortunately, Glendale city code is not cut and dry on this issue. It is very vague. If you follow the letter of the law for Glendale, it is against the law to even park a dually 1-ton in residential neighborhoods.

There are two of them that we know of. Could be more. Last year we had an issue with a house flipper that was going around looking over back yard fences and reporting every minor nuance within a property. I received over 20 code violation notices in one week. Many of my neighbors also...

My neighbors 52 motorhome has a dry weight of 21500 lbs. My 5-ton dry weighs in at about 16000. I hope they do something about his motorhome as it overhangs the sidewalk by about 4 inches.

Forgive me if I have posted this in the wrong thread. I just received a Code Enforcement Action from the City of Glendale Neighborhood Services Department for my 5-ton that I have had parked on the side of my house for the past 8 months. It states no parking of commercial/overweight vehicles...

Are you getting four or five flashing lights? Four flashing seems to represent a problem with a sticking valve or a leak and five seem to represent an electrical component issue. If you are getting four flashing, try running the system in run flat mode. I have to put the system on mine in run...

@Cumminsbandit, what are the symptoms? Four or five flashing lights? Four lights indicate that the system cannot maintain pressure and five flashing lights indicate a problem with a CTIS electrical component. If you have four flashing lights, check all the air connections at the tire valves...

Here is a link to the troubleshooting guide: http://dana.com/wps/wcm/connect/25f359804b1f69fba8acfff859534476/DEXT-axts0015-0710_CTIS_TroubleshootingGuide_LR.pdf?MOD=AJPERES&CONVERT_TO=url&CACHEID=25f359804b1f69fba8acfff859534476

One light flashing is normal if there is a low tire. Just means that the system is checking the pressure and attempting to fill the low tire(s).

Make sure all the fitting at the tire fill valves are tight. Mine didn't work when I got the truck due to a defective pressure sensor on the wet tank outlet. Replaced it and it started giving me the 4 flashing lights. I reset the unit and then did a walkaround when it was running. Had air...

Not sure if this is the one I am looking for: Dana Spicer Tire Inflation Pressure Switches 673345 NSN 5930-01-446-9234 CTIS

The TM states that it is a 85-psi switch. Is there an equivalent part available and if so, where?

Hello Everyone. I am a new owner of a M923A2. I have got my CTIS to work by bypassing the pressure switch under the vehicle and tightening the fittings on the front wheels. The pressure switch seems to be bad. Question is, where can I get one of these pressure switches. It has a canon plug...