Search results

Thanks for your input, I think I'm going to go ahead and get it and be done with it.

Next week I'm getting a 200 amp manual transfer switch wired into my house with a 50 amp plug. I have a 50' 50 amp cord for my supply. We are going to make up a whip from the generator lugs to a 50 amp plug we will mount to the trailer fender. What wires go into which lugs on the generator for...

Thanks for your guidance. It all sounds straight forward. I'm not exactly the go-to when it comes to electrical and electrical troubleshooting. I just bought one of the kill-a-watt meters off Amazon. If I find the meter is swinging with the gauge and the reading is correct what direction should...

Another observation I have on my new to me 803 is after start up during the warm up period especially if I adjust the hertz rotary dial the voltage meter bounces around quite sporadically. So if I have the volts dialed in at 220V the gauge may bounce around from 220 to below 150 or 100 and...

Thanks guys for sharing your knowledge. Feel much better now!

Hi everyone and happy new year. I bought a 803 with no fluids and filters. I removed the radiator bottom drain valve and flushed the radiator blowing out some residual dirty coolant. I notice the drain valve doesn't have an o-ring or a gasket of any type on it to create a seal. I reinstalled it...

Thanks for your guidance. I'm not familiar at all with them. I appreciate your time in steering me right.

I found it on the schematic attached in the thread. I ordered it from the part number listed. The wing nut has a gasket formed to it which keeps a seal around the mating surface of the filter which I could have probably done without but want to play it safe.

Thanks guys!

I just bought a 02' Mep-803a and I'm in the process of getting it ready to start. I'm missing the wing nut which secures the air filter inside the housing. Does anyone by chance know the replacement part number or what thread size the stud is?