Search results

Hello, I been trouble shooting a no heat problem in my 6.2 not getting hot at all. I realize there is no thermostat in it. Does anyone have the part number for the correct thermostat for a 6.2 motor? Thanks in advance.

IT LIVES! Thanks for all the help getting it running, changed all 8 glow plugs, installed new KDS and yellow stripe sender. Added ground kit, hooked up batteries, clicked on to wait...lasted longer this time....light off cranked for like half a turn and started right up! Thank you again for all...

Thanks Cam, You don't still have those stock M998 springs do you? Lol... I been all over the TM's all I keep finding is part numbers for heavy springs. I will look again but if you still have your old springs or can help me find a PN, it would be awesome. There is so many springs out there and...

Hey Camoyj7, In your first post to me you had referenced a post about someone doing the opposite of what I want to do. Well they changed the lower control arms, springs and top mounts to use the 8,660 lb springs. Here is my confusion. If they changed the lower control arm, why did they change it...

Retiredwarhorse, I think is saying that the newer HMMWV's have the cast mount and I can get the stock newer HMMWV spring and it will just go right in. I am still waiting from him to confirm. Years - 1998-2006 P/N - 12342616 Tie Wrap - Gray Spring Rate - Variable Coil Diameter - 0.8 / 1.26...

I do have the cast mounts and the M1037 springs, is there any reason I can't just use the M998 springs and spacers at the top? I am thinking if I use spacers at the top, that lower the spring to the same position that the M998 top spring mount does, I am thinking like a 2 inch spacer it would be...

M1037 REAR SPRING CHANGE? ANY ADVICE OR PARTS LIST? I did some research and found out that the upper rear spring perch and the springs are different in a M1037. They are 1 turn taller. I am thinking I can just add M998 rear springs and a spacer and maybe new shocks and I will be fine. I'd like...

M1037 REAR SPRING CHANGE? ANY ADVICE OR PARTS LIST? I did some research and found out that the upper rear spring perch and the springs are different in a M1037. They are 1 turn taller. I am thinking I can just add M998 rear springs and a spacer and maybe new shocks and I will be fine. I'd like...

Plan on it! I am actully disconnecting battery to install keyed battery cut off, then install S3, new glowplugs, Ground kit then install new batteries, then try to start! lol

Thank you!

Prestolite Protective Control Box, I 'd like to change it out to a Nartron S3. I have a question. It comes with the TSU and where do I install it. Is it under the black cap with the wires coming out of it near the no step stamp on the air intake This is the picture of where I think the TSU...

Thanks for all the help, I have a Prestolite Protective Control Box, I 'd like to change it out to a Nartron S3. I have a question. It comes with the TSU and where do I install it. Is it under the black cap with the wires coming out of it near the no step stamp on the air intake?

Previous owner changed but not really sure, so I was gonna test them but would like to by a set to have incase I need to change. Id like to change with the best that you can recommend? Thanks

Best Glowplugs to buy and link if anyone has...Thank you all!

Ok thank you Dock R, Isn't there some kind of advance ya nee to set by tapping the gas petal after wait before cranking?

What is the starting procedure for starting a cold 1990 M1037? Just want to make sure it is no me...lol

Thanks 98G NDT, I found it on ebay and was looking at it on Gov Planet buy missed the auction...it is clean and figured I can change springs. I think I will need M998 spring and spacer cause M1037 has larger spring and room for it

Glowplugs new, I wil do some more research...Thank you

Thank you Norm! Thor runs awesome, when I can start him. A little shot of ether starts and runs great but if I try to start cold after the wait light cycles, it just cranks with white smoke? Is there a cold start procedure I am missing? I realize the M1037 is the Shelter carrier version. I am...

Thanks for the add, finally picked up my 1990 M1037 looking forward to minting "THOR" Thanks for the add, finally picked up my 1990 M1037 looking forward to minting "THOR" OUT! LOL. (wife named him), Kinda fitting it being delivered on Veteran's Day! I have a few questions, who is the best...