Search results

Is the instrument bezel in real nice shape? Would you be willing to ship to denver? How much for it?

Hello All- Installed electric fuel pump and spin on filter and it is working great. I have an extra fuel pump and filter base that I need to get rid of. To celebrate I am giving them away. The filter base has a leak but if you want to try and repair it you can or else I will pitch it. And there...

You can get oil tested through Blackstone Labs for like $20. Look on their website and they will send you a sample canister. Bill

Make sure you remove the oil filler cap when warm and running to check for blow by. Bill

thanks a bunch

Hello- Just finished cutting down the new bracket to fit the starter on my M1009. The bolt was still there along with the old bracket and looks good. I don't have the nut that attaches to the starter. Have looked on all the posts here and only the bolt sizes are listed. Does anyone know the nut...

Does anyone know the size of the nut that attaches to the starter, #5 in the picture. Thanks, Bill

Best of luck with your truck, Bill

Hello- Question to anyone who has installed the banks turbo kit. I am not going to be able to install a recently purchased sidewinder kit on my m1009 until the summer. I have to do some work on the cooling system and will have the coolant drained sometime soon. I wanted to know if I can put the...

If it is any consolation, went to start my truck today at costco after loading it with a bunch of food for work. and the starter made a noise like the solenoid was bad or the gears were stripped. turns out one of the bolts broke, had to get towed also. a shop drilled out the old bolt put and new...

I got it from transtar in denver 303 307 1999, they are listed as (there are two sets of numbers for the gear and gasket not sure which it it) A34684/ K34411 Gear, 400 Gov Gear Kit 34306/3914D Gasket, 400 Gear Cover 64 Not sure if they ship or not, but take the pin out...

I fixed it!! I fixed it!!! Here I am bragging again, dahhhh!! Replaced the governor, $2.50 saved me $1700. Thank you wonderful hosts!!!!!!

Thanks for the response, seems like a good part to get new if I can, since it is cheap and is prone to break. Anyone know of a place to get one unused?

The transmission shifted so nice before this happened, so I was very surprised when it did. I had just been bragging to everyone I saw about how awesome the truck is. I already replaced the vacuum lines to the vacuum pump when I installed a temp gauge. Have been reading a bit on the governor...

What is the governor gear and what does it do? Is it expensive to replace? THanks for the reply, Bill

Hello- Was on my way to work today on the highway and my m1009 suddenly felt like it went into neutral but it was still in gear. I didn't hear a clunk or bang or anything. I thought I put it in neutral by accident. I pulled off the highway, put it in drive, and it only went into first gear and...

Thanks so much, The odometer read 29045 miles when I bought it, and I was a bit weary at first. After driving it for a while, running fuel additives, changing the filters and fluids, I am really starting to believe that I got an awesome deal on a great low mileage truck that had been sitting...

Whoops, I put an O instead of a 0 in the registration#...........

Hello- Bought an 85 M1009 that was auctioned mid Dec of 09 from the UT National Guard, Vin# 1G8ED18J6FF202175 Make/ Model# CD10516 Stock# 2320011232665 Reg# NFODQH Bumper#s UTNG TMPX83 Thank you so much for your help, Bill G

wallew- On friday how will I know to recognize you? My name is Bill and I am early thirties, blond hair, hanging out with my father in law, driving 85 m1009. Will bring lawn chairs! Bill