Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Mine doesnt lope really but i also have the fuel turned up pretty hard on it. I finally broke down and purchased two new yokam commerical grade batteries. 925CCA with 160RC and it cranks it fine but i still have the ignition issue. as soon as i turn the ignition over while it is running, i can...
starter leads read 25.4v, relay reads 25.5v, battery reads 25.6v..... i mean, i guess having the ignition off isnt that big of a deal....my fuel tank is in the back so fuel always gets to the motor...i can still turn my headlights on, my tach and speedo work, only thing i cant read is temp...
true, im not sure....how can i tell? yesterday , i put 2 brand new batteries in it and went to crank it and it started with just flipping the ignition on once and then i killed it and started it again and had to hit the start button.... can i use any relay to replace? well, any 24v relay that...
where the arrow points, there is a fitting on the hub. closest pic i have of them. i simply drilled out a hole, tapped it, and threaded a zerk fitting into it.
i dont have any pics of it right now but i can get some. I took the 2 1/2 tons out and got some 5 tons and the fittings are on the side of the hub assembly (inside the rim well). It was not my idea, i saw a few guys had fittings on their 2 1/2 ton mud trucks hub assemblies so i asked and now i...
thats every weekend lol. i have new seals and bearings in them. also have outers packed with grease and zerk fittings on them so i can pack them every weekend. has worked great so far. got stuck a few weeks ago and had to leave it in some nasty clay/water/mud/crap overnight so i just knew they...
ok i will also check my connections but how could i test the amp draw digitaldust? or just make sure all connections are tight and clean and should be good to go? i dont think it is a bad connection because the starter will come out, it just wont spin!
well the starter really has never gone under completely. it has gotten pretty covered though. i usually pressure wash the truck every sunday after takin it out but if the seals are bad then def could have some gunk in there. When i took it off it looked pretty clean in there but then again i...
so as you can tell, my deuce is PURELY a mud truck... got the truck about 6 months ago and have had really no running issues with it...until now. The starter began to hang up on me when i first got it so i flipped the disk in the solenoid and it was fine. well, now the starter will not start. at...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!