Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
1986 M998 4 man soft top. Goodyear MT/R (radials) with the 12 bolt rims and runflat donuts inside. I have assumed the TP 20 and TP 25 stamps on the fenders were meant for the old bias tires.
The -10 TM doesn't list a M998 so I did the chalk test.
35 psi Front and Rear left a nice chalk mark...
1986 stock M998. My shifter has stopped moving into 1 and 2. It still moves from R to N to D so it's not a critical issue but I prefer starting in 1 and manually shifting to 2 then D to get the RPMs up (otherwise the trans shifts too quickly to drive...).
This has randomly happened over the...
Hello all -
My 1986 Humvee project is running great after a bunch of work that it needed when I got it...and thank you for the input and answers I found on this site as well as the specific replies to my questions.
Here are some cheap options to secure your Humvee when parked...
I installed a...
I have searched google and here with no definite answer....so thanks in advance for your input.
I have a 1986 M998 and just finished installing a dual voltage 210 Amp Niehoff 1387 alternator (it has the 3225 Regulator).
I currently just have the 14v tap on the alternator grounded to the...
I bought a challenged 1986 M998 in July. I have installed a new 210 amp Niehoff dual volt alternator N1387 Alternatorwith N3225 Regulator(with 200 amp conversion kit)(was 60 amp), cleaned all major electrical connections, added new grounding harness, Nartron Smart Start System (with new yellow...
My install is complete...but before I hook up the batteries and test the system I would like to get some confirmation from the experts.
My wire 5A has no label...middle of the photo...above the large red boot...it has red heat shrink on it and it is attached to the IGN on the regulator and...
I purchased a 1986 M998 in August....it had a melted 60 amp generator (and several other gremlins)...so after much reading here it made sense to get the 200 amp dual volt 2920-01-420-9968 / 12447109 and the conversion kit 57K3520...I found both cheap on ebay so I thought I would take the ebay...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!