Search results

For those of you in the TN, VA, SC, GA, area... I will have my MKT85 setup at the Denton MV Gathering once again this April at the Denton Farmpark in Denton, NC... I cook for those who have signed up in advance (part of my deal with the Farmpark Management is that I only feed my "friends"...

I really enjoy using mine with the MBU's... They provide great heat, are easy to troubleshoot, and fuel is easy to find (especially since I can pull from the tank on the XM813...). On the other hand, I used to enjoy using the earlier gas burners when cooking ribs or such since I didn't have to...

I ran my MKT-85 at the Haspin gathering one year off a Harbor Freight 800watt two stroke generator... Remember, all it has to do is provide juice for the MBU air pumps and logic boards (and, in my case, LED lighting...). The heat for cooking is coming from the diesel being burned...

The tire appears to be a Michelin, so hopefully, the previous owner replaced the stock tube with a new radial tube when the tire was installed and used a fresh flap when doing so... If so, Ken might get lucky and be able to patch his and move on... I have a few good Michelin tubes/flaps in...

As the above responses have stated, fuel is bypassing the cutoff solenoid. Most likely because someone has screwed in/out (I never can remember the direction) the knob that bypasses the cutoff solenoid... Often done when someone is having electrical issues (weak batteries/weak charging/too...

I have the event blocked out on my work calendar. I plan to have my MKT-85 again this year....May change up the vehicle towing it from the XM813 to something else... Menu ideas will be posted closer to the event.

I had a copy of David Ahl's book at one time (given to me for a Christmas present when it was published). It was a compilation of his articles in MV Magazine (he was the magazine's publisher). The info wasn't bad, but the book could have been a lot more... I no longer have my copy, I loaned...

I have put the dates on my work schedule so that I can ensure that the MKT85 makes an appearance... Perhaps it is time to start the Denton 2022 thread?

There are areas of the house and property that are off limits to the cleaning crew... :) These pages have been in the flat file cabinet next to the workbench for decades... I'm surprised that they didn't yellow more than they did...

I've attached the two files containing the scans of the installation instructions for the convoy light set that I purchased NOS back in the 1990's for use on my M35A2C...that got moved to a XM813... One scan is of the text pages with the parts list and step by step installation instructions, the...

Now that he has them installed... I've attached the two files containing the scans of the installation instructions for the convoy light set that I purchased NOS back in the 1990's for use on my M35A2C...that got moved to a XM813... One scan is of the text pages with the parts list and step...

I will miss seeing it make its rally debut... You know that we always appreciate and enjoy your attendance at the rally with or without a vehicle... Looking forward to seeing you Saturday.

Since we are getting close... Remember that we don't have cell reception unless you are top of the mountain or go down the road five or ten miles (depending on direction). We do have decent WIFI so you can access the internet (and place calls if you have set up your phone to use WIFI...)...

The event is getting closer and closer... :) Pre-Registrations are almost the same as last year, so we should have a nice groups heading out on the trails and hanging around the field, farm, Lodge, orchards, county roads...

To answer some questions that I also answered via private messages... On-Site registration is at the HQ/Registration Tent in the middle of the main event field. Chuck will happily register you for the entire event of for a day or two... The HQ Tent is the line up location for the organized...

Don't forget to get your registrations to me soon... That way you can enjoy the early registration discount and I can have a more accurate count for planning purposes... Thanks!

Don't forget that the folks at Circle B Stables at Graves Mountain are happy to put you or a family member on a single horsepower, four hoofed, oat burning, trail runner if you get tired of riding a MV or Jeep... :) They've also been known to work deals with experienced equestrians so that you...

We had a great turnout for the trail cleanup weekend last week (coincided with Peach Day at Graves Mountain on July 25th...). Had crews on both Doubletop and Graves Mountains ensuring that they are ready for our event...

The shirts have been ordered... Price will be determined once the shop has completed the order and I know what the final costs are... Chuck will have them for sale at the Registration/HQ Tent. This year, we are honoring those who gave all in the service of our Country...

One of these days, I will enable online registration.... Meanwhile, mail the form to me.... Form is in this thread, on the event website, and was mailed to those who have attended previously.... Thanks!