Search results

Ok guys I recently got a new to me M-37 project truck at auction, it is probably the best shape candidate that I've seen. Engine is out of it, there was one in the bed on a stand. It obviously isn't correct as it has 6 volt equipment on it. I also got another engine in the round metal military...

I'm looking at a M-936A2 that has been overloaded and damaged the shipper, lift cylinders, steel lines that go to boom winch, and assuming the inner boom extension cylinder. Would be open to a whole wrecker bed to part out or just the parts I need if someone is parting one out

Looking for a mule in decent shape close to Indiana open to all versions let me know what you have available. Thank you

Great barn find, hadn't ran in at least 10 years. Jerry can fuel supply, new batteries and coil-points it roared to life and drove into the trailer. Had a friend lowboy trailer it home the 125 miles.

Good evening, been working on our M56-B1 M-37 style contact maintenance truck. After getting the truck running after sitting several years we found a sizeable crack in the front of the exhaust manifold. Ordered a new matched set from vintage power wagons including studs. Long story short after...

Does anyone have any information on the m-37 dodge contact maintenance trucks? Looking for pictures, data tags, tool load out, manuals. Thanks in advance

Good afternoon all. Working on our M-62 engine swap today. I'm the one that put the fire truck continental 6602 in place of a bad 6602 and I'm working on the installing the steel vacuum and or vent lines. I stopped by and got pictures from a couple of M-54 trucks and they're a little different...

I need some help with an M62 project if anyone know the in and outs of the old gasser 6602. I have a 55 IH M62 with a bad engine so we were able to locate an engine from sam winner on eBay and sit them side by side and there are several different accessories like the oil filter location that's...

Hey guys I'm looking for information and a source for my law enforcement MRAP that we recently acquired. Power steering seems to just come and go at will, some low speeds it performs ok but others it goes completely away. The power steering fluid is all foam from air in the system when we add...

Does anyone know the ins and outs of these units? Recently acquired one from GP and had it shipped. Got it running great with batteries and a fuel filter. But the generator only makes 88 volts to ground on each leg. Found that if I put tension on the potentiometer by pushing it up or down on the...